Research Papers

Methods for Separation of Copper Oxide Nanoparticles From Colloidal Suspension in Dodecane

[+] Author and Article Information
Mohammed H. Sheikh

Department of Aerospace
Engineering and Mechanics,
The University of Alabama,
Tuscaloosa, AL 35487-0280
e-mail: mdharoon85@gmail.com

Muhammad A. R. Sharif

Department of Aerospace
Engineering and Mechanics,
The University of Alabama,
Tuscaloosa, AL 35487-0280
e-mail: msharif@eng.ua.edu

1Corresponding author.

Manuscript received December 22, 2013; final manuscript received March 12, 2014; published online April 4, 2014. Assoc. Editor: Jung-Chih Chiao.

J. Nanotechnol. Eng. Med 5(1), 011001 (Apr 04, 2014) (9 pages) Paper No: NANO-13-1088; doi: 10.1115/1.4027219 History: Received December 22, 2013; Revised March 12, 2014

Phase change materials (PCM) are used in many energy storage applications. Energy is stored (latent heat of fusion) by melting the PCM and is released during resolidification. Dispersing highly conductive nanoparticles into the PCM enhances the effective thermal conductivity of the PCM, which in turn significantly improves the energy storage capability of the PCM. The resulting colloidal mixture with the nanoparticles in suspension is referred to as nanostructure enhanced phase change materials (NEPCM). A commonly used PCM for energy storage application is the family of paraffin (CnH2n+2). Mixing copper oxide (CuO) nanoparticles in the paraffin produces an effective and highly efficient NEPCM for energy storage. However, after long term application cycles, the efficiency of the NEPCM may deteriorate and it may need replacement with fresh supply. Disposal of the used NEPCM containing the nanoparticles is a matter of concern. Used NEPCM containing nanoparticles cannot be discarded directly into the environment because of various short term health hazards for humans and all living beings and unidentified long term environmental and health hazards due to nanoparticles. This problem will be considerable when widespread use of NEPCM will be practiced. It is thus important to develop technologies to separate the nanoparticles before the disposal of the NEPCM. The primary objective of this research work is to develop methods for the separation and reclamation of the nanoparticles from the NEPCM before its disposal. The goal is to find, design, test, and evaluate separation methods which are simple, safe, and economical. The specific NEPCM considered in this study is a colloidal mixture of dodecane (C12H26) and CuO nanoparticles (1–5% mass fraction and 5–15 nm size distribution). The nanoparticles are coated with a surfactant or stabilizing ligands for suspension stability in the mixture for a long period of time. Various methods for separating the nanoparticles from the NEPCM are explored. The identified methods include: (i) distillation under atmospheric and reduced pressure, (ii) mixing with alcohol mixture solvent, and (iii) high speed centrifugation. These different nanoparticle separation methods have been pursued and tested, and the results are analyzed and presented in this article.

Copyright © 2014 by ASME
Your Session has timed out. Please sign back in to continue.


Nomura, T., Okinaka, N., and Akiyama, T., 2009, “Impregnation of Porous Material With Phase Change Material for Thermal Energy Storage,” Mater. Chem. Phys., 115(2–3), pp. 846–850. [CrossRef]
Kuznik, F., David, D., Johannes, K., and Roux, J., 2011 “A Review on Phase Change Materials Integrated in Building Walls,” Renewable Sustainable Energy Rev., 15(1), pp. 379–391. [CrossRef]
Meng, Q., and Hu, J., 2008, “A Poly(Ethylene Glycol)-Based Smart Phase Change Material,” Sol. Energy Mater. Sol. Cells, 92(10), pp. 1260–1268. [CrossRef]
Liu, M., Saman, W., and BrunoF., 2012, “Review on Storage Materials and Thermal Performance Enhancement Techniques for High Temperature Phase Change Thermal Storage Systems,” Renewable Sustainable Energy Rev., 16(4), pp. 2118–2132. [CrossRef]
Khodadadi, J. M., Fan, L., and Babaei, H., 2013, “Thermal Conductivity Enhancement of Nanostructure-Based Colloidal Suspensions Utilized as Phase Change Materials for Thermal Energy Storage: A Review,” Renewable Sustainable Energy Rev., 24, pp. 418–444. [CrossRef]
Fan, L., and Khodadadi, J. M., 2011, “Thermal Conductivity Enhancement of Phase Change Materials for Thermal Energy Storage: A Review,” Renewable Sustainable Energy Rev., 15(1), pp. 24–46. [CrossRef]
GunawanC., Teoh, W. Y., Marquis, C. P., and Amal, R., 2011, “Cytotoxic Origin of Copper(II) Oxide Nanoparticles: Comparative Studies With Micron-Sized Particles, Leachate, and Metal Salts,” ACS Nano, 5(9), pp. 7214–7225. [CrossRef] [PubMed]
Heinlaan, M., Kahru, A., Kasemets, K., Arbeille, B., Prensier, G., and Dubourguier, H., 2011, “Changes in the Daphnia Magna Midgut Upon Ingestion of Copper Oxide Nanoparticles: A Transmission Electron Microscopy Study,” Water Res., 45(1), pp. 179–190. [CrossRef] [PubMed]
Manusadžianas, L., Caillet, C., Fachetti, L., Gylytė, B., Grigutytė, R., Jurkonienė, S., Karitonas, R., Sadauskas, K., ThomasF., Vitkus, R., and Férard, J. F., 2012, “Toxicity of Copper Oxide Nanoparticle Suspensions to Aquatic Biota,” Environ. Toxicol. Chem., 31(1), pp. 108–114. [CrossRef] [PubMed]
Wang, Z., Li, N., Zhao, J., White, J. C., Qu, P., and B.Xing, 2012, “CuO Nanoparticle Interaction With Human Epithelial Cells: Cellular Uptake, Location, Export, and Genotoxicity,” Chem. Res. Toxicol., 25(7), pp. 1512–1521. [CrossRef] [PubMed]
Liu, F. K., Ko, F. H., Huang, P. W., Wu, C. H., and Chu, T. C., 2005, “Studying the Size/Shape Separation and Optical Properties of Silver Nanoparticles by Capillary Electrophoresis,” J. Chromatogr., A, 1062(1), pp. 139–145. [CrossRef]
Lam, K. F., Sorensen, E., and Gavriilidis, A., 2011, “Towards an Understanding of the Effects of Operating Conditions on Separation by Microfluidic Distillation,” Chem. Eng. Sci., 66(10), pp. 2098–2106. [CrossRef]
Xiong, B., Cheng, J., Qiao, Y., Zhou, R., He, Y., and Yeung, E. S., 2011, “Separation of Nanorods by Density Gradient Centrifugation,” J. Chromatogr., A, 1218(25), pp. 3823–3829. [CrossRef]
Chen, H., Kaminski, M. D., Ebner, A. D., Ritter, J. A., and Rosengart, A. J., 2007, “Theoretical Analysis of a Simple Yet Efficient Portable Magnetic Separator Design for Separation of Magnetic Nano/Micro-Carriers From Human Blood Flow,” J. Magn. Magn. Mater., 313(1), pp. 127–134. [CrossRef]
Liu, F., 2009, “Using Micellar Electrokinetic Chromatography for the Highly Efficient Preconcentration and Separation of Gold Nanoparticles,” J. Chromatogr., A, 1216(12), pp. 2554–2559. [CrossRef]
Van der Bruggen, B., Mänttäri, M., and Nyström, M., 2008, “Drawbacks of Applying Nanofiltration and How to Avoid Them: A Review,” Sep. Purif. Technol., 63(2), pp. 251–263. [CrossRef]
Vertellus, 2005, “Material Safety Data,” http://www.vertellus.com/Documents/MSDS/N-Dodecane%20English.pdf
Clary, D. R., and Mills, G., 2011, “Preparation and Thermal Properties of CuO Particles,” J. Phys. Chem., C, 115(5), pp. 1767–1775. [CrossRef]
Coker, A. K., 2010, “Distillation: Part 1: Distillation Process Performance,” Ludwig's Applied Process Design for Chemical and Petrochemical Plants, 4th ed., Vol. 2, Gulf Professional Publishing, Boston, MA, pp. 1–268.
Yang, D., Martinez, R., Fayyaz-Najafi, B., and Wright, R., 2010, “Light Hydrocarbon Distillation Using Hollow Fibers as Structured Packings,” J. Membr. Sci., 362(1–2), pp. 86–96. [CrossRef]
Sánchez, L. M. G., Meindersma, G. W., and Haan, A. B., 2009, “Potential of Silver-Based Room-Temperature Ionic Liquids for Ethylene/Ethane Separation,” Ind. Eng. Chem. Res., 48(23), pp. 10650–10656. [CrossRef]
Shi-Chang, W., 1987, “Ten Years' Development on Distillation in China,” Desalination, 64, pp. 211–215. [CrossRef]


Grahic Jump Location
Fig. 3

NEPCM before and after distillation

Grahic Jump Location
Fig. 4

Laboratory vacuum distillation unit

Grahic Jump Location
Fig. 1

(a) Schematic diagram of a nanoparticle with long ligands coated on its surface serving as the stabilizing cushion layer and (b) Ligands on particle surface to provide a physical barrier (cushion) which prevents particle contact and subsequent agglomeration

Grahic Jump Location
Fig. 5

Collected distillate; (a) atmospheric pressure distillation and (b) vacuum distillation

Grahic Jump Location
Fig. 6

Distillation data comparison on total energy and total time basis

Grahic Jump Location
Fig. 7

SEM images of: (a) dodecane, (b) NEPCM, (c) distillate after atmospheric pressure distillation, and (d) distillate after vacuum distillation; the 1 μm scale is shown at the lower right corner of (b)

Grahic Jump Location
Fig. 8

NEPCM and alcohol mixture

Grahic Jump Location
Fig. 9

Successive reduction of NEPCM volume by mixing and shaking in alcohol mixture

Grahic Jump Location
Fig. 12

SEM image of the centrifuged sample (a) in Fig. 11; the 10 nm scale is on the lower right corner

Grahic Jump Location
Fig. 13

(a) Before centrifugation, (b) after 24 h of centrifugation, and (c) after 48 h of centrifugation

Grahic Jump Location
Fig. 14

(a) UV-Vis spectra of 2 wt. % NEPCM and sample 3 (after 24 h) and (b) UV-Vis spectra of 1 wt. % NEPCM and sample 5 (after 48 h)

Grahic Jump Location
Fig. 15

Calibration curve for centrifugation; (a) sample 2 and (b) sample 3

Grahic Jump Location
Fig. 10

UV-Vis spectrum of samples. Baseline is for pure dodecane and Run1 is for the clear liquid after first mixing as shown in Fig. 9.

Grahic Jump Location
Fig. 11

Centrifugation: Nanoparticle precipitation. Sample: volume: 13 ml, speed: 18,000 rpm, duration of centrifugation: 19.5 h. (a) 0.5% conc. (by mass) repeated once, (b) 2% conc. (by mass), and (c) 5% conc. (by mass).



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In