Research Papers

X-Ray Diffraction Analysis of Kraft Lignins and Lignin-Derived Carbon Nanofibers

[+] Author and Article Information
Azadeh Goudarzi

Department of Materials Engineering,
University of British Columbia,
6350 Stores Road,
Vancouver, BC V6T 1Z4, Canada
e-mail: goudarzi@mail.ubc.ca

Li-Ting Lin, Frank K. Ko

Department of Materials Engineering,
University of British Columbia,
6350 Stores Road,
Vancouver, BC V6T 1Z4, Canada

Manuscript received April 9, 2014; final manuscript received July 17, 2014; published online September 4, 2014. Assoc. Editor: Hsiao-Ying Shadow Huang.

J. Nanotechnol. Eng. Med 5(2), 021006 (Sep 04, 2014) (5 pages) Paper No: NANO-14-1032; doi: 10.1115/1.4028300 History: Received April 09, 2014; Revised July 17, 2014

Lignin is a renewable material and it is abundantly available as low priced industrial residue. Lignin-based carbon fibers are economically attractive and sustainable. In addition, remarkably oxidized molecule of the lignin decreases the required time and temperature of the thermostabilization process compared to other carbon fiber precursors such as polyacrylonitrile (PAN); and thus, decreases the processing cost of carbon fiber production. The fraction 4 of softwood Kraft lignin (SKL-F4) was previously shown to be spinnable via electrospinning to produce carbon nanofibers. In this paper, we characterized different Kraft lignin powders through X-ray diffraction (XRD) analysis to measure the mean size of the ordered domains in different fractionations of softwood and hardwood samples. According to our results, SKL-F4 has largest ordered domains among SKLs and highest hydroxyl content according to Fourier transform infrared (FTIR) analysis. In addition, variations in the XRD patterns during carbon nanofiber formation were studied and the peak for (101) plane in graphite was observed in the carbon nanofiber carbonized at 1000 °C.

Copyright © 2014 by ASME
Your Session has timed out. Please sign back in to continue.


Zakzeski, J., Bruijnincx, P. C., Jongerius, A. L., and Weckhuysen, B. M., 2010, “The Catalytic Valorization of Lignin for the Production of Renewable Chemicals,” Chem. Rev., 110(6), pp. 3552–3599. [CrossRef] [PubMed]
Baker, D. A., and Rials, T. G., 2013, “Recent Advances in Low-Cost Carbon Fiber Manufacture From Lignin,” J. Appl. Polym. Sci., 130(2), pp. 713–728. [CrossRef]
Morgan, P., 2005, “Precursors for Carbon Fiber Manufacture,” Carbon Fibers and Their Composites, Vol. 121, Taylor & Francis Group, LLC, Boca Raton, FL. [CrossRef]
Hüttinger, K. J., Figueiredo, J. L., Bernardo, C. A., Baker, R. T. K., and Hüttinger, K. J., 1990, Carbon Fibers, Filaments and Composites, Vol. 177, Springer, The Netherlands.
Frank, E., Hermanutz, F., and Buchmeiser, M. R., 2012, “Carbon Fibers: Precursors, Manufacturing, and Properties,” Macromol. Mater. Eng., 297(6), pp. 493–501. [CrossRef]
Boehm, H. P., 1994, “Some Aspects of the Surface Chemistry of Carbon Blacks and Other Carbons,” Carbon, 32(5), pp. 759–769. [CrossRef]
Kadla, J. F., Kubo, S., Gilbert, R. D., and Venditti, R. A., 2002, “Lignin-Based Carbon Fibers,” Chemical Modification, Properties, and Usage of Lignin, Springer, New York, pp. 121–137.
Kubo, S., and Kadla, J. F., 2006, “Carbon Fibers From Lignin-Recyclable Plastic Blends,” Encyclopedia of Chemical Processing, Taylor & Francis, UK, pp. 317–331.
Broughton, J. R., R. M., and Brady, P., 1995, “Fiber Forming Polymers,” Wellington Sears Handbook of Industrial Textiles, Vol. 31, CRC Press.
Baker, D. A., Gallego, N. C., and Baker, F. S., 2012, “On the Characterization and Spinning of an Organic ‐Purified Lignin Toward the Manufacture of Low‐Cost Carbon Fiber,” J. Appl. Polym. Sci., 124(1), pp. 227–234. [CrossRef]
Maradur, S. P., Kim, C. H., Kim, S. Y., Kim, B. H., Kim, W. C., and Yang, K. S., 2012, “Preparation of Carbon Fibers From a Lignin Copolymer with Polyacrylonitrile,” Synth. Met., 162(5), pp. 453–459. [CrossRef]
Kadla, J. F., Kubo, S., Venditti, R. A., Gilbert, R. D., Compere, A. L., and Griffith, W., 2002, “Lignin-Based Carbon Fibers for Composite Fiber Applications,” Carbon, 40(15), pp. 2913–2920. [CrossRef]
Kadla, J. F., and Kubo, S., 2004, “Lignin-Based Polymer Blends: Analysis of Intermolecular Interactions in Lignin–Synthetic Polymer Blends,” Composites Part A, 35(3), pp. 395–400. [CrossRef]
Kubo, S., Uraki, Y., and Sano, Y., 1996, “Thermomechanical Analysis of Isolated Lignins,” Holzforschung, 50(2), pp. 144–150. [CrossRef]
Kubo, S., and Kadla, J. F., 2005, “Lignin-Based Carbon Fibers: Effect of Synthetic Polymer Blending on Fiber Properties,” J. Polym. Environ., 13(2), pp. 97–105. [CrossRef]
Compere, A. L., Griffth, W. L., Leitten, C. F., Jr., and Pickel, J. M., 2005, “Evaluation of Lignin From Alkaline-Pulped Hardwood Black Liquor,” http://www.ornl.gov/info/reports/2005/3445605475900.pdf
Wahyuni, E. T., Kunarti, E. S., and Sugiharto, E., “Performance of TiO2 Nanoparticle Prepared on Lignin Structure as Photocatalyst for Hazardous Mercury Removal Through Photoreduction Mechanism,” Available at http://mipa.ugm.ac.id/web/files/publikasi/paper-endangtw.pdf
Kubo, S., Yasumitsu, U., and Yoshihiro, S., 2003, “Catalytic Graphitization of Hardwood Acetic Acid Lignin With Nickel Acetate,” J. Wood Sci., 49(2), pp. 188–192. [CrossRef]
Ansari, K. B., and Gaikar, V. G., 2013, “Green Hydrotropic Extraction Technology for Delignification of Sugarcane Bagasse by Using Alkybenzene Sulfonates as Hydrotropes,” Chem. Eng. Sci., pp. 157–166.
Brodin, I., Sjöholm, E., and Gellerstedt, G., 2009, “Kraft Lignin as Feedstock for Chemical Products: The Effects of Membrane Filtration,” Holzforschung, 63(3), pp. 290–297. [CrossRef]
Wallberg, O., Jönsson, A. S., and Wimmerstedt, R., 2003, “Fractionation and Concentration of Kraft Black Liquor Lignin With Ultrafiltration,” Desalination, 154(2), pp. 187–199. [CrossRef]
Dallmeyer, J. I., 2013, “Preparation and Characterization of Lignin Nanofibre-Based Materials Obtained by Electrostatic Spinning,” Ph.D. thesis, https://circle.ubc.ca/bitstream/./ubc_2013_spring_dallmeyer_james.pdf
Laurichesse, S., and Avérous, L., 2014, “Chemical Modification of Lignins: Towards Biobased Polymers,” Prog. Polym. Sci, 39, pp. 1266–1290. [CrossRef]
Bugg, T. D., Ahmad, M., Hardiman, E. M., and Rahmanpour, R., 2011, “Pathways for Degradation of Lignin in Bacteria and Fungi,” Nat. Prod. Rep., 28(12), pp. 1883–1896. [CrossRef] [PubMed]
Popescu, C. M., Singurel, G., Popescu, M. C., Vasile, C., Argyropoulos, D. S., and Willför, S., 2009, “Vibrational Spectroscopy and X-ray Diffraction Methods to Establish the Differences Between Hardwood and Softwood,” Carbohydr. Polym., 77(4), pp. 851–857. [CrossRef]
Huang, Y., Wang, L., Chao, Y., Nawawi, D. S., Akiyama, T., Yokoyama, T., and Matsumoto, Y., 2012, “Analysis of Lignin Aromatic Structure in Wood Based on the IR Spectrum,” J. Wood Chem. Technol., 32(4), pp. 294–303. [CrossRef]
Boeriu, C. G., Bravo, D., Gosselink, R. J., and van Dam, J. E., 2004, “Characterisation of Structure-Dependent Functional Properties of Lignin With Infrared Spectroscopy,” Ind. Crops Prod., 20(2), pp. 205–218. [CrossRef]
Kumar, S., Negi, Y. S., and Upadhyaya, J. S., 2010, “Studies on Characterization of Corn Cob Based Nanoparticles,” Adv. Mater. Lett., 1(3), pp. 246–253. [CrossRef]
Monshi, A., Foroughi, M. R., and Monshi, M. R., 2012, “Modified Scherrer Equation to Estimate More Accurately Nano-Crystallite Size Using XRD,” World J. Nano Sci. Eng., 2, pp. 154–160. [CrossRef]
Cullity, B. D., 1957, “Elements of X-ray Diffraction,” Am. J. Phys., 25(6), pp. 394–395. [CrossRef]
Russ, J. C., 1984, Fundamentals of Energy Dispersive X-Ray Analysis, Butterworths, London, UK.
Chen, S., He, G., Carmona-Martinez, A. A., Agarwal, S., Greiner, A., Hou, H., and Schröder, U., 2011, “Electrospun Carbon Fiber Mat With Layered Architecture for Anode in Microbial Fuel Cells,” Electrochem. Commun., 13(10), pp. 1026–1029. [CrossRef]
Im, J. S., Kim, M. I., and Lee, Y. S., 2008, “Preparation of PAN-Based Electrospun Nanofiber Webs Containing TiO2 for Photocatalytic Degradation,” Mater. Lett., 62(21), pp. 3652–3655. [CrossRef]
Hwang, T. H., Jung, D. S., Kim, J. S., Kim, B. G., and Choi, J. W., 2013, “One-Dimensional Carbon–Sulfur Composite Fibers for Na–S Rechargeable Batteries Operating at Room Temperature,” Nano Lett., 13(9), pp. 4532–4538. [CrossRef] [PubMed]


Grahic Jump Location
Fig. 1

FTIR spectra of lignin powders

Grahic Jump Location
Fig. 2

XRD patterns of the lignin powders

Grahic Jump Location
Fig. 3

Carbon and sulfur content of the lignin powder based on EDS analysis (error bars: standard deviation, n>6)

Grahic Jump Location
Fig. 4

SEM images of the SKL-F4 nanofibers: (a) as-spun, (b) thermostabilized, and (c) carbonized sample. Scale bar is 10 μm, d is the average diameter of the fibers.

Grahic Jump Location
Fig. 5

TGA analysis of the SKL-F4 (filled line: in air, dashed line: in nitrogen)

Grahic Jump Location
Fig. 6

XRD patterns of the empty sample (a) empty holder, (b) SKL-F4 powder, (c) carbonized fiber mat, and (d) grinded carbonized sample. The SEM image of carbonized fiber mat, a schematic of carbonized fiber structure, and a schematic of sample preparation method are shown in the top right-hand side.




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In