A detailed chemistry-based CFD model was developed to simulate the diesel spray combustion and emission process. A reaction mechanism of n-heptane is coupled with a reduced NOx mechanism to simulate diesel fuel oxidation and NOx formation. The soot emission process is simulated by a phenomenological soot model that uses a competing formation and oxidation rate formulation. The model is applied to predict the diesel spray lift-off length and its sooting tendency under high temperature and pressure conditions with good agreement with experiments of Sandia. Various nozzle diameters and chamber conditions were investigated. The model successfully predicts that the sooting tendency is reduced as the nozzle diameter is reduced and/or the initial chamber gas temperature is decreased, as observed by the experiments. The model is also applied to simulate diesel engine combustion under PCCI-like conditions. Trends of heat release rate, NOx and soot emissions with respect to EGR levels and start-of-injection timings are also well predicted. Both experiments and models reveal that soot emissions peak when the start of injection occurs close to TDC. The model indicates that low soot emission at early SOI is due to better oxidation while low soot emission at late SOI is due to less formation. Since NOx emissions decrease monotonically with injection retardation, a late injection scheme can be utilized for simultaneous soot and NOx reduction for the engine conditions investigated in this study.
- Internal Combustion Engine Division
Modeling Diesel Spray Flame Lift-Off, Sooting Tendency and NOx Emissions Using Detailed Chemistry With Phenomenological Soot Model
- Views Icon Views
- Share Icon Share
- Search Site
Kong, S, Sun, Y, & Reitz, RD. "Modeling Diesel Spray Flame Lift-Off, Sooting Tendency and NOx Emissions Using Detailed Chemistry With Phenomenological Soot Model." Proceedings of the ASME 2005 Internal Combustion Engine Division Spring Technical Conference. ASME 2005 Internal Combustion Engine Division Spring Technical Conference. Chicago, Illinois, USA. April 5–7, 2005. pp. 149-157. ASME. https://doi.org/10.1115/ICES2005-1009
Download citation file: