Volumes | International Manufacturing Science and Engineering Conference | American Society of Mechanical Engineers Digital Collection

Topics: Additive manufacturing , Automobiles , Biomimetics , Enameling , Honeycomb structures , Mechanical properties , Compressive strength , Absorption , Deformation , Design

Computational Study of Reinforcement Mechanisms of Cuttlefish Bone Inspired Structure for 3D Printing

Brandon Bethers, Yang Yang

MSEC 2021; V001T01A003doi:https://doi.org/10.1115/MSEC2021-60894

Abstract

View Article

PDF

Topics: Additive manufacturing , Bone , Design , Stress

Magnetic Field Assisted 3D Printing of Limpet Teeth Inspired Polymer Matrix Composite With Compression Reinforcement

Dylan Joralmon, Evangeline Amonoo, Yizhen Zhu, Xiangjia Li

MSEC 2021; V001T01A004doi:https://doi.org/10.1115/MSEC2021-61050

Abstract

View Article

PDF

Topics: Additive manufacturing , Compression , Magnetic fields , Minerals , Polymer composites

Effect of Heat Treatment on Microstructures and Mechanical Properties of SS316L by Micro Selective Laser Melting

Jin Fu, Shuo Qu, Junhao Ding, Xu Song, Mingwang Fu

MSEC 2021; V001T01A005doi:https://doi.org/10.1115/MSEC2021-61726

Abstract

View Article

PDF

Topics: Heat treating (Metalworking) , Lasers , Mechanical properties , Melting , Stainless steel

Anisotropic Material Behaviors of 3D Printed Carbon-Fiber Polymer Composites With Open-Source Printers

Jordan Garcia, Robert Harper, Y. Charles Lu

MSEC 2021; V001T01A006doi:https://doi.org/10.1115/MSEC2021-62317

Abstract

View Article

PDF

Topics: Additive manufacturing , Anisotropy , Carbon fibers , Composite materials , Fibers , Polymer composites

Performance of Low-Cost 3D Printer in Medical Application

Nor Aiman Sukindar, Azib Azhari Awang Dahan, Sharifah Imihezri Syed Shaharuddin, Nor Farah Huda Abd Halim

MSEC 2021; V001T01A007doi:https://doi.org/10.1115/MSEC2021-63208

Abstract

View Article

PDF

Topics: Additive manufacturing , Biomedicine , Bone , Compression , Compressive stress , Computer software , Computer-aided design , Deformation , Density , Design

Thermal Monitoring and Modeling of Ti-6Al-4V Thin Wall Temperature Distribution During Blown Powder Laser Directed Energy Deposition

Basil J. Paudel, Garrett J. Marshall, Scott M. Thompson

MSEC 2021; V001T01A008doi:https://doi.org/10.1115/MSEC2021-63263

Abstract

View Article

PDF

Topics: Lasers , Modeling , Temperature distribution , Thin wall structures

Discrete-Element Simulation of Powder Spreading Process in Binder Jetting, and the Effects of Powder Size

Ana Paula Clares, Guha Manogharan

MSEC 2021; V001T01A009doi:https://doi.org/10.1115/MSEC2021-63351

Abstract

View Article

PDF

Topics: Additive manufacturing , Binders (Materials) , Ceramics , Density , Porosity , Simulation

Modeling and Experimental Validation of Droplet Generation in Electrohydrodynamic Inkjet Printing for Prediction of Printing Quality

Liangkui Jiang, Pavithra Premaratne, Yanhua Huang, Zhan Zhang, Hantang Qin

MSEC 2021; V001T01A010doi:https://doi.org/10.1115/MSEC2021-63375

Abstract

View Article

PDF

Topics: Computer simulation , Drops , Electrohydrodynamics , Modeling , Printing

Experimental Investigation Into the Fabrication of Porous Biodegradable Fe Scaffold by Microwave Sintering of 3D Printed Green Body

Dipesh Kumar Mishra, Pulak Mohan Pandey

MSEC 2021; V001T01A011doi:https://doi.org/10.1115/MSEC2021-63402

Abstract

View Article

PDF

Topics: Additive manufacturing , Biodegradation , Extruding , Manufacturing , Microwaves , Sintering

Pneumatic Microextrusion-Based Additive Biofabrication of Polycaprolactone Bone Scaffolds: Part II – Investigation of the Influence of Polymer Flow Parameters

Mohan Yu, Logan Lawrence, Pier Paolo Claudio, James B. Day, Roozbeh (Ross) Salary

MSEC 2021; V001T01A012doi:https://doi.org/10.1115/MSEC2021-63412

Abstract

View Article

PDF

Topics: Additive manufacturing , Bone , Extruding , Flow (Dynamics) , Manufacturing , Polymers

Additive Manufacturing of Porous Ceramics With Foaming Agent

Zipeng Guo, Lu An, Sushil Lakshmanan, Jason N. Armstrong, Shenqiang Ren, Chi Zhou

MSEC 2021; V001T01A013doi:https://doi.org/10.1115/MSEC2021-63493

Abstract

View Article

PDF

Topics: Additive manufacturing , Ceramics , Inks

Deformation Analysis of 3D Printed Metacarpophalangeal and Interphalangeal Joints via Transfer Learning

Juan Diego Toscano, Sahand Hajifar, Christian Oswaldo Segura, Luis Javier Segura, Hongyue Sun

MSEC 2021; V001T01A014doi:https://doi.org/10.1115/MSEC2021-63623

Abstract

View Article

PDF

Topics: Additive manufacturing , Deformation , Bracing (Construction) , Mechanical properties , Data collection , Design , Extruding , Machinery , Modeling , Printing

A Method to Predict Fatigue Life of Additively Manufactured Metallic Parts

Hanyu Zhu, Nanzhu Zhao, Sandeep Patil, Amit Bhasin, Wei Li

MSEC 2021; V001T01A015doi:https://doi.org/10.1115/MSEC2021-63632

Abstract

View Article

PDF

Topics: Additive manufacturing , Damage , Electrical resistance , Fatigue life

Impacts of Process Parameters on Shape Memory Properties of Stereolithography Manufactured Parts: An Experimental Analysis

Jing Zhao, Muyue Han, Lin Li

MSEC 2021; V001T01A016doi:https://doi.org/10.1115/MSEC2021-63635

Abstract

View Article

PDF

Topics: Experimental analysis , Shape memory properties , Shapes , Smart materials , Stereolithography

4D Printing of Complex Ceramic Structures via Controlling Zirconia Contents and Patterns

Zhicheng Rong, Chang Liu, Yingbin Hu

MSEC 2021; V001T01A017doi:https://doi.org/10.1115/MSEC2021-63642

Abstract

View Article

PDF

Topics: Ceramics , Printing , Shrinkage (Materials)

Hybrid-Light-Source Stereolithography for Fabricating Macro-Objects With Micro-Textures

Wenxuan Jia, Yuen-Shan Leung, Huachao Mao, Han Xu, Chi Zhou, Yong Chen

MSEC 2021; V001T01A018doi:https://doi.org/10.1115/MSEC2021-63717

Abstract

View Article

PDF

Topics: Calibration , Stereolithography , Texture (Materials)

Closed-Loop Control of Silicone Extrusion-Based Additive Manufacturing Based on Machine Vision

Xiaoqing Tian, Yaling Li, Dingyifei Ma, Jiang Han, Lian Xia

MSEC 2021; V001T01A019doi:https://doi.org/10.1115/MSEC2021-63719

Abstract

View Article

PDF

Topics: Additive manufacturing , Extruding , Machinery , Silicones

Prediction of Melt-Pool Characteristics in SLM Process for Ti6Al4V Using a Semi-Analytical Model

Shubhra Kamal Nandi, Rakesh Kumar, Anubhav, Anupam Agrawal

MSEC 2021; V001T01A020doi:https://doi.org/10.1115/MSEC2021-63751

Abstract

View Article

PDF

Topics: Boundary-value problems , Computer simulation , Convection , Dimensions , Finite volume methods , Geometry , Heat , Heat conduction , Heat losses , Heat transfer

A Computational Study on Novel Runner Extension Designs via 3D Sand-Printing to Improve Casting Performance

Ryan Stebbins, Philip King, Guha Manogharan

MSEC 2021; V001T01A021doi:https://doi.org/10.1115/MSEC2021-63823

Abstract

View Article

PDF

Topics: Casting , Printing , Sands , Design , Air entrainment , Computational fluid dynamics , Flow (Dynamics) , Sand casting (Process) , Turbulence , Waves

Prediction of Thermal Conditions of DED With FEA Metal Additive Simulation

Lauren Heinrich, Thomas Feldhausen, Kyle S. Saleeby, Christopher Saldana, Thomas R. Kurfess

MSEC 2021; V001T01A022doi:https://doi.org/10.1115/MSEC2021-63841

Abstract

View Article

PDF

Topics: Additive manufacturing , Finite element analysis , Gas metal arc welding , Metals , Simulation

Toward Intelligent Online Scan Sequence Optimization for Uniform Temperature Distribution in LPBF Additive Manufacturing

Keval S. Ramani, Ehsan Malekipour, Chinedum E. Okwudire

MSEC 2021; V001T01A023doi:https://doi.org/10.1115/MSEC2021-63870

Abstract

View Article

PDF

Topics: Additive manufacturing , Optimization , Temperature distribution , Lasers , Machinery , Calibration , Deformation , Errors , Metals , Physics

Design and Manufacturing of Topology Optimized Heat Sinks Made of Copper Using 3D Printing

Bilal Taha, Sandeep Patil, Brian H. Dennis

MSEC 2021; V001T01A024doi:https://doi.org/10.1115/MSEC2021-63877

Abstract

View Article

PDF

Topics: Additive manufacturing , Copper , Design , Heat sinks , Manufacturing , Optimization , Topology

Development of Intertwined Infills to Improve Multi-Material Interfacial Bond Strength

Irfan Mustafa, Tsz-Ho Kwok

MSEC 2021; V001T01A025doi:https://doi.org/10.1115/MSEC2021-63965

Abstract

View Article

PDF

Topics: Additive manufacturing , Bond strength , Bonding , Computer-aided design , Computer-aided manufacturing , Design , Doors , Innovation , Mechanical properties , Production planning

Selective Laser Melting of Stainless Steel 316L for Mechanical Property-Gradation

Yash Parikh, Mathew Kuttolamadom

MSEC 2021; V001T01A026doi:https://doi.org/10.1115/MSEC2021-64108

Abstract

View Article

PDF

Topics: Additive manufacturing , Lasers , Melting , Stainless steel

Characterization of Co-Cr-Mo Alloys Manufacturing via Directed Energy Deposition

Michael Liu, Mathew Kuttolamadom

MSEC 2021; V001T01A027doi:https://doi.org/10.1115/MSEC2021-64111

Abstract

View Article

PDF

Topics: Alloys , Lasers , Manufacturing , Metals , Abrasion , Additive manufacturing , Biocompatibility , Casting , Knee joint prostheses , Materials properties

Effects of Size Reduction on the Failure Mechanism of 3D Printed PLA+ Parts

Zane Decker, Mason Makulinski, Suprita Vispute, Murali Sundaram

MSEC 2021; V001T01A028doi:https://doi.org/10.1115/MSEC2021-64133

Abstract

View Article

PDF

Topics: Additive manufacturing , Failure mechanisms , Modeling , Size reduction (Materials)

Advanced Materials Manufacturing

Thermo-Mechanical Simulation of Ti6Al4V-NiTi Dissimilar Laser Welding Process

Aspen Glaspell, Jae Joong Ryu, Kyosung Choo

MSEC 2021; V001T02A001doi:https://doi.org/10.1115/MSEC2021-58537

Abstract

View Article

PDF

Topics: Fiber lasers , Laser welding , Nickel titanium alloys , Simulation , Thermomechanics , Welding

Integrating Friction-Stir Back Extrusion to Powder Metallurgy

Sahil Dhoka, Scott W. Wagner, Himansshu Abhi, Nicholas V. Hendrickson, William J. Emblom

MSEC 2021; V001T02A002doi:https://doi.org/10.1115/MSEC2021-64052

Abstract

View Article

PDF

Topics: Extruding , Friction , Powder metallurgy , Aluminum , Automobiles , Metals , Alloys , Aluminum powders , Aluminum tube , Compacting

Investigation of the Dynamic Response of a Multispot System at Joining Using Ultrasonic Welding

Tae Hwa Lee, Pei-Chung Wang, S. Jack Hu, Mihaela Banu

MSEC 2021; V001T02A003doi:https://doi.org/10.1115/MSEC2021-64916

Abstract

View Article

PDF

Topics: Dynamic response , Joining , Polymer composites , Ultrasonic welding

Biomanufacturing

Three-Dimensional Cell Culture With Alginate Hetero Gel Microspheres

Youping Gong, Jinlai Qi, Rougang Zhou, Honghao Chen, Junling He, Zizhou Qiao, Zhikai Bi, Huipeng Chen, Haiqiang Liu, Guojin Chen, Xiang Zhang, Huifeng Shao

MSEC 2021; V001T03A001doi:https://doi.org/10.1115/MSEC2021-63242

Abstract

View Article

PDF

Topics: Biocompatibility , Biological tissues , Chemistry , Drugs , Flow (Dynamics) , Manufacturing , Needles , Printing , Proteins , Pumps

Prediction of Cutting Force in Bone Cutting Using Finite Element Analysis

Varatharajan Prasannavenkadesan, Ponnusamy Pandithevan

MSEC 2021; V001T03A002doi:https://doi.org/10.1115/MSEC2021-63406

Abstract

View Article

PDF

Topics: Bone , Cutting , Finite element analysis

Investigation of the Regenerative Potential of Human Bone Marrow Stem Cell-Seeded Polycaprolactone Bone Scaffolds, Fabricated Using Pneumatic Microextrusion Process

Logan Lawrence, James B. Day, Pier Paolo Claudio, Roozbeh (Ross) Salary

MSEC 2021; V001T03A003doi:https://doi.org/10.1115/MSEC2021-63411

Abstract

View Article

PDF

Topics: Additive manufacturing , Biomedicine , Bone , Manufacturing

Investigation of the Functional Properties of Additively-Fabricated Triply Periodic Minimal Surface-Based Bone Scaffolds for the Treatment of Osseous Fractures

Abigail Chaffins, Mohan Yu, Pier Paolo Claudio, James B. Day, Roozbeh (Ross) Salary

MSEC 2021; V001T03A004doi:https://doi.org/10.1115/MSEC2021-63413

Abstract

View Article

PDF

Topics: Additive manufacturing , Biomedicine , Bone , Extruding , Fracture (Materials) , Fracture (Process) , Manufacturing

Designing an Interchangeable Multi-Material Nozzle System for 3D Bioprinting Process

Cartwright Nelson, Slesha Tuladhar, Md Ahasan Habib

MSEC 2021; V001T03A005doi:https://doi.org/10.1115/MSEC2021-63471

Abstract

View Article

PDF

Topics: Bioprinting , Design , Nozzles , Rheology

Manufacturing of Biodegradable Intramedullary Nail With High Strength

Huifeng Shao, Zhuoluo Jing, Rougang Zhou, Zhiheng Nian, Haiqiang Liu, Youping Gong, Yong He

MSEC 2021; V001T03A006doi:https://doi.org/10.1115/MSEC2021-63654

Abstract

View Article

PDF

Topics: Biodegradation , Fracture (Materials) , Fracture (Process) , Intramedullary rods , Magnesium (Metal) , Manufacturing

Rheological Analysis of Low Viscosity Hydrogels for 3D Bio-Printing Processes

Slesha Tuladhar, Cartwright Nelson, Md Ahasan Habib

MSEC 2021; V001T03A007doi:https://doi.org/10.1115/MSEC2021-63658

Abstract

View Article

PDF

Topics: Hydrogels , Printing , Rheology , Shapes , Viscosity

Friction Analysis in Needle Insertion Into Soft Tissue

Yingda Hu, Murong Li, Yong Lei

MSEC 2021; V001T03A008doi:https://doi.org/10.1115/MSEC2021-63715

Abstract

View Article

PDF

Topics: Friction , Needles , Soft tissues , Biological tissues , Pressure , Young's modulus , Deformation , Robotics , Safety

Vibration-Assisted Insertion of Flexible Neural Microelectrodes With Bio-Dissolvable Guides for Medical Implantation

Yi Wang, Yen Yu Ian Shih, Yuan-shin Lee

MSEC 2021; V001T03A009doi:https://doi.org/10.1115/MSEC2021-63952

Abstract

View Article

PDF

Topics: Biomedicine , Probes , Vibration , Damage , Electrodes , Biological tissues , Buckling , Surgery , Design , Friction

A Rheological Study of Bio-Ink: Shear Stress and Cell Viability

Md Ahasan Habib, Bashir Khoda

MSEC 2021; V001T03A010doi:https://doi.org/10.1115/MSEC2021-63996

Abstract

View Article

PDF

Topics: Inks , Rheology , Shear stress

Experimental Investigation of the Material Removal Rate in Grinding of Calcified Plaque by Rotational Atherectomy

Xinxiao Li, Patrick Chernjavsky, Katerina Angjeli, Sola Hoffman, Sara Frunzi, Yihao Zheng

MSEC 2021; V001T03A011doi:https://doi.org/10.1115/MSEC2021-64056

Abstract

View Article

PDF

Topics: Grinding

Life Cycle Engineering

Towards a Digital Depot to Support Sustainable Manufacturing During Crisis Response

Nancy Diaz-Elsayed, K. C. Morris, Julius Schoop

MSEC 2021; V001T04A001doi:https://doi.org/10.1115/MSEC2021-62227

Abstract

View Article

PDF

Topics: Cycles , Manufacturing , Supply chains , Sustainability

Swedish Manufacturing Practices Towards a Sustainability Transition in Industry 4.0: A Resilience Perspective

Arpita Chari, Johan Vogt Duberg, Emma Lindahl, Johan Stahre, Mélanie Despeisse, Erik Sundin, Björn Johansson, Magnus Wiktorsson

MSEC 2021; V001T04A002doi:https://doi.org/10.1115/MSEC2021-62394

Abstract

View Article

PDF

Topics: Manufacturing , Resilience , Sustainability

In-Situ Calibrated Digital Process Twin Models for Resource Efficient Manufacturing

David Adeniji, Julius Schoop

MSEC 2021; V001T04A003doi:https://doi.org/10.1115/MSEC2021-63460

Abstract

View Article

PDF

Topics: Aerospace industry , Energy efficiency , Machining , Manufacturing , Titanium aluminide

Framework for User-Friendly Modeling of Energy Use in Fused Deposition Modeling

Xiange Wang, Philip Kent, Barbara S. Linke

MSEC 2021; V001T04A004doi:https://doi.org/10.1115/MSEC2021-63507

Abstract

View Article

PDF

Topics: Additive manufacturing , Energy consumption , Modeling , Physics

Material Properties of Discarded Textiles for Manufacturing Feedstocks

Asad Bashir, Abigail R. Clarke-Sather, Tyler M. Poggogiale, Christopher L. Meehan

MSEC 2021; V001T04A005doi:https://doi.org/10.1115/MSEC2021-63645

Abstract

View Article

PDF

Topics: Feedstock , Geotextiles , Manufacturing , Materials properties , Recycling , Textiles

Material Efficiency and Economics of Hybrid Additive Manufacturing

Peter Francis Reginald Elvis, Senthilkumaran Kumaraguru

MSEC 2021; V001T04A006doi:https://doi.org/10.1115/MSEC2021-63739

Abstract

View Article

PDF

Topics: Additive manufacturing , Economics

Greenhouse Gas Emission Analysis of Integrated Production-Inventory-Transportation Supply Chain Enabled by Additive Manufacturing

Lei Di, Gaurav Manish Shah, Yiran Yang, Cuicui Wei

MSEC 2021; V001T04A007doi:https://doi.org/10.1115/MSEC2021-63822

Abstract

View Article

PDF

Topics: Additive manufacturing , Emissions , Greenhouse gases , Supply chains , Transportation systems

Forecasting Repair and Maintenance Services of Medical Devices Using Support Vector Machine

Hao-yu Liao, Willie Cade, Sara Behdad

MSEC 2021; V001T04A008doi:https://doi.org/10.1115/MSEC2021-63966

Abstract

View Article

PDF

Topics: Machine learning , Maintenance , Medical devices , Support vector machines

Manufacturing Equipment and Automation

Laser Micro Machining Using a Photonic Nanojet in Water Medium

Tsutomu Uenohara, Reza Aulia Rahman, Yasuhiro Mizutani, Yasuhiro Takaya

MSEC 2021; V001T05A001doi:https://doi.org/10.1115/MSEC2021-60045

Abstract

View Article

PDF

Topics: Lasers , Machining , Micromachining , Water

Time Domain Study on the Construction Mechanism of Milling Stability Lobe Diagrams With Multiple Modes

Weitao Li, Liping Wang, Guang Yu

MSEC 2021; V001T05A002doi:https://doi.org/10.1115/MSEC2021-60227

Abstract

View Article

PDF

Topics: Chatter , Construction , Milling , Stability

The FDTD Analysis of Near-Field Response for Microgroove Structure With Standing Wave Illumination for the Realization of Coherent Structured Illumination Microscopy

Yizhao Guan, Hiromasa Kume, Shotaro Kadoya, Masaki Michihata, Satoru Takahashi

MSEC 2021; V001T05A003doi:https://doi.org/10.1115/MSEC2021-60409

Abstract

View Article

PDF

Topics: Finite difference time-domain analysis , Microscopy , Standing waves

Numerical Study on Tip Shape of Near-Field Optical Fiber Probe for Detecting Electric Field Intensity of Whispering Gallery Mode Resonance

Yushen Liu, Shotaro Kadoya, Masaki Michihata, Satoru Takahashi

MSEC 2021; V001T05A004doi:https://doi.org/10.1115/MSEC2021-60417

Abstract

View Article

PDF

Topics: Electric fields , Optical fiber , Probes , Resonance , Shapes , Wavelength

Time Domain Simulation of Dynamic Corner Milling Process Considering Chatter Vibration With Finite Amplitude

Norikazu Suzuki, Hiroki Hayashi, Eiji Shamoto, Naruhiro Irino, Yasuhiro Imabeppu

MSEC 2021; V001T05A005doi:https://doi.org/10.1115/MSEC2021-60651

Abstract

View Article

PDF

Topics: Chatter , Corners (Structural elements) , Milling , Simulation , Vibration

Influence of Contact Positioning of Pivot Support on Machining Vibration

Kotaro Mori, Iwao Yamaji, Daisuke Kono, Atsushi Matsubara, Takehiro Ishida, Yuki Kaitani, Eiji Higashi, Taisuke Urakami

MSEC 2021; V001T05A006doi:https://doi.org/10.1115/MSEC2021-63302

Abstract

View Article

PDF

Topics: Chatter , Damping , Machining , Vibration suppression , Flat plates

Development of Cutting Tools With Micro-Textured Surface for High Speed Machining of Ti-6Al-4V

Mitsuru Hasegawa, Tatsuya Sugihara

MSEC 2021; V001T05A007doi:https://doi.org/10.1115/MSEC2021-63373

Abstract

View Article

PDF

Topics: Cutting tools , High speed machining , Machining , Texture (Materials) , Wear

A Study of the Efficacy of Flame Electrical Resistance for Standoff Measurements During the Oxyfuel Cutting Process

Christopher R. Martin, Alexandrina Untaroiu, Kemu Xu, S. M. Mahbobur Rahman

MSEC 2021; V001T05A008doi:https://doi.org/10.1115/MSEC2021-63615

Abstract

View Article

PDF

Topics: Cutting , Electrical resistance , Flames , Electrons , Measurement uncertainty , Uncertainty

Trajectory-Dependent Compensation Scheme to Reduce Manipulator Execution Errors for Manufacturing Applications

Prahar M. Bhatt, Rishi K. Malhan, Pradeep Rajendran, Aniruddha V. Shembekar, Satyandra K. Gupta

MSEC 2021; V001T05A009doi:https://doi.org/10.1115/MSEC2021-63617

Abstract

View Article

PDF

Topics: Errors , Manipulators , Manufacturing , Trajectories (Physics) , Control equipment , End effectors , Robots

Platform Development of Tick Collection Robot

Yesiliang Qiu, Janet Dong, Caroline “Niki” Harrison Moretto

MSEC 2021; V001T05A010doi:https://doi.org/10.1115/MSEC2021-63693

Abstract

View Article

PDF

Topics: Robots , Software development , Army , Biomedicine , Design , Manufacturing , Robotics , Soil , Soldiers , Testing

Anisotropic Cutting Force Characteristics in Milling of Maraging Steel Processed Through Selective Laser Melting

Shoichi Tamura, Takashi Matsumura, Atsushi Ezura, Kazuo Mori

MSEC 2021; V001T05A011doi:https://doi.org/10.1115/MSEC2021-63704

Abstract

View Article

PDF

Topics: Additive manufacturing , Anisotropy , Cutting , Lasers , Melting , Milling , Steel

Enhancement of Force Control Performance of Macro-Micro System Based Polishing Robot With Gravity Compensation

Shotaro Ogawa, Katsuki Koto, Takuhiro Tsukada, Yasuhiro Kakinuma

MSEC 2021; V001T05A012doi:https://doi.org/10.1115/MSEC2021-63720

Abstract

View Article

PDF

Topics: Force control , Gravity (Force) , Polishing , Robots

Performance Evaluation of Robot Polishing in Macro-Micro System Based Polishing Robot

Katsuki Koto, Takuhiro Tsukada, Shotaro Ogawa, Yasuhiro Kakinuma

MSEC 2021; V001T05A013doi:https://doi.org/10.1115/MSEC2021-63721

Abstract

View Article

PDF

Topics: Performance evaluation , Polishing , Robots

Automated Tool Path Generation for End-Milling Operation Using CAD Model in STL Format

Isamu Nishida, Keiichi Shirase

MSEC 2021; V001T05A014doi:https://doi.org/10.1115/MSEC2021-63727

Abstract

View Article

PDF

Topics: Computer-aided design , Milling , Machining , Shapes , Three-dimensional computer-aided design , Resolution (Optics)

Cutting State Estimation via Chatter Mark on End Milled Surface and Analysis of Its Formation Mechanism Using Voxel Model Simulation

Nobutoshi Ozaki, Shota Matsui, Toshiki Hirogaki, Eiichi Aoyama

MSEC 2021; V001T05A015doi:https://doi.org/10.1115/MSEC2021-63809

Abstract

View Article

PDF

Topics: Chatter , Cutting , Fourier transforms , Simulation , State estimation , Vibration

A Digital Twin for Automated Layup of Prepreg Composite Sheets

Yi-Wei Chen, Rex Jomy Joseph, Alec Kanyuck, Shahwaz Khan, Rishi K. Malhan, Omey M. Manyar, Zachary McNulty, Bohan Wang, Jernej Barbič, Satyandra K. Gupta

MSEC 2021; V001T05A016doi:https://doi.org/10.1115/MSEC2021-63900

Abstract

View Article

PDF

Topics: Composite materials , Finite element analysis , Simulation , Textiles , Canvas , Deformation , Engineering simulation , Errors , Hardening (Curing) , Laminates

Multiple Sound Sensors And Fusion In Modern CNN-Based Machine State Prediction

Eunseob Kim, Huitaek Yun, Martin Byung-Guk Jun, Kyunghyun Kim, Suk Won Cha

MSEC 2021; V001T05A017doi:https://doi.org/10.1115/MSEC2021-64036

Abstract

View Article

PDF

Topics: Artificial neural networks , Machine tools , Machinery , Sensors , Signals , Internet of things , Manufacturing , Acoustics , Bridges (Structures) , Conveyor systems

Analysis of Vibration Signals in Monitoring Titanium End Milling Process Using Triaxial Accelerometer

John Henry Navarro-Devia, Dzung Viet Dao, Yun Chen, Huaizhong Li

MSEC 2021; V001T05A018doi:https://doi.org/10.1115/MSEC2021-64688

Abstract

View Article

PDF

Topics: Accelerometers , Machining , Milling , Signals , Titanium , Vibration

Study on Non-Axisymmetric 3D Curved Surface Turning by Driven-Type Rotary Tool Synchronized With Spindle

Akane Ishizuka, Narimasa Ueda, Yoshitaka Morimoto, Akio Hayashi, Yoshiyuki Kaneko, Naohiko Suzuki

MSEC 2021; V001T05A019doi:https://doi.org/10.1115/MSEC2021-65062

Abstract

View Article

PDF

Topics: Linear motors , Turning , Machining , Automobiles , Hybrid electric vehicles , Internal combustion engines , Shapes , Valves , Carbon dioxide , Climate change

All Years

Proceedings Papers

Front Matter

Additive Manufacturing

Advanced Materials Manufacturing

Biomanufacturing

Life Cycle Engineering

Manufacturing Equipment and Automation

Email alerts

Most Read Proceedings Papers in MSEC

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only