In this paper, we extend the finite volume direct average micromechanics to enable the use of quadrilateral subcells. To do this work, the quadrilateral subcells are used to discretize the repeating unit cells first. Then the average displacement and traction defined on the boundary of the subcell are evaluated by direct integral method. This contrasts with the original formulation in which all of the subcells are rectangular. Following the discretization, the cell problem is defined by combining the directly volume-average of the subcell stress equilibrium equations with the displacement and traction continuity in a surface-average sense across the adjacent subcell faces. In order to assemble the above equations and conditions into a global equation system, the global and local number systems, which index the boundary of subcell in different manners, are employed by the extended method. Finally, the global equation system is solved and the solutions give the formulations of the microstress field and the global elastic moduli of material. The introduction of quadrilateral subcells increases the efficiency of modeling the material’s microstructure and eliminates the stress concentrations at the curvilinear bimaterial corners. Herein, the advantage of the extension is presented by comparing the global moduli and local stress fields predicted by the present method with the corresponding results obtained from the original version.
Skip Nav Destination
e-mail: gaoxiguang@gmail.com
Article navigation
January 2009
Research Papers
Quadrilateral Subcell Based Finite Volume Micromechanics Theory for Multiscale Analysis of Elastic Periodic Materials
Xiguang Gao,
Xiguang Gao
College of Energy and Power Engineering,
e-mail: gaoxiguang@gmail.com
Nanjing University of Aeronautics and Astronautics
, 29 Yudao Street, Nanjing, 210016, P.R.C
Search for other works by this author on:
Yingdong Song,
Yingdong Song
College of Energy and Power Engineering,
Nanjing University of Aeronautics and Astronautics
, 29 Yudao Street, Nanjing, 210016, P.R.C
Search for other works by this author on:
Zhigang Sun
Zhigang Sun
College of Energy and Power Engineering,
Nanjing University of Aeronautics and Astronautics
, 29 Yudao Street, Nanjing, 210016, P.R.C
Search for other works by this author on:
Xiguang Gao
College of Energy and Power Engineering,
Nanjing University of Aeronautics and Astronautics
, 29 Yudao Street, Nanjing, 210016, P.R.Ce-mail: gaoxiguang@gmail.com
Yingdong Song
College of Energy and Power Engineering,
Nanjing University of Aeronautics and Astronautics
, 29 Yudao Street, Nanjing, 210016, P.R.C
Zhigang Sun
College of Energy and Power Engineering,
Nanjing University of Aeronautics and Astronautics
, 29 Yudao Street, Nanjing, 210016, P.R.CJ. Appl. Mech. Jan 2009, 76(1): 011013 (7 pages)
Published Online: November 6, 2008
Article history
Received:
December 5, 2007
Revised:
May 21, 2008
Published:
November 6, 2008
Citation
Gao, X., Song, Y., and Sun, Z. (November 6, 2008). "Quadrilateral Subcell Based Finite Volume Micromechanics Theory for Multiscale Analysis of Elastic Periodic Materials." ASME. J. Appl. Mech. January 2009; 76(1): 011013. https://doi.org/10.1115/1.2966176
Download citation file:
Get Email Alerts
Hamiltonian System-Based Symplectic Framework for Analytical Vibration Analysis of Microplates
J. Appl. Mech (December 2024)
Related Articles
Parametric Finite-Volume Micromechanics of Uniaxial Continuously-Reinforced Periodic Materials With Elastic Phases
J. Eng. Mater. Technol (July,2008)
Linear Thermoelastic Higher-Order Theory for Periodic Multiphase Materials
J. Appl. Mech (September,2001)
Computationally Efficient Micromechanical Models for Woven Fabric Composite Elastic Moduli
J. Appl. Mech (July,2001)
Related Proceedings Papers
Related Chapters
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Flexibility Analysis
Process Piping: The Complete Guide to ASME B31.3, Third Edition
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading