Quadrotors have been used in many areas such as cargo transportation, agriculture, and search and rescue. The low energy density of power sources and the low energy efficiency of quadrotors have prevented quadrotors from a wider range of applications where a large payload has to be carried or long flight time is required. This paper optimizes the energy efficiency of a quadrotor via rotating its arms to proper positions calculated based on the dynamics model of the quadrotor and the power–thrust curve of rotors. The conditions that a quadrotor in steady-state can achieve the optimal energy efficiency are mathematically derived and the energy efficiency of a quadrotor in various scenarios is analyzed. Based on the analysis, an arm-rotation approach is proposed to optimize the energy efficiency of a quadrotor with a center-of-gravity offset in steady hovering. It is shown with simulation that an example quadrotor with rotatable arms can save up to 13% of energy. Experiments show that the same example quadrotor can save even more energy in practice, owing to the byproduct of the arm-rotation approach.
Skip Nav Destination
Article navigation
September 2019
Research-Article
Optimize Energy Efficiency of Quadrotors Via Arm Rotation
Hao Xiong,
Hao Xiong
School of Engineering Technology,
Purdue University,
West Lafayette, IN 47907
e-mail: xiong60@purdue.edu
Purdue University,
West Lafayette, IN 47907
e-mail: xiong60@purdue.edu
Search for other works by this author on:
Xiumin Diao
Xiumin Diao
1Corresponding author.
Search for other works by this author on:
Hao Xiong
School of Engineering Technology,
Purdue University,
West Lafayette, IN 47907
e-mail: xiong60@purdue.edu
Purdue University,
West Lafayette, IN 47907
e-mail: xiong60@purdue.edu
Jin Hu
Xiumin Diao
1Corresponding author.
Contributed by the Dynamic Systems Division of ASME for publication in the JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT,AND CONTROL. Manuscript received August 28, 2018; final manuscript received March 13, 2019; published online April 9, 2019. Assoc. Editor: Ming Xin.
J. Dyn. Sys., Meas., Control. Sep 2019, 141(9): 091002 (10 pages)
Published Online: April 9, 2019
Article history
Received:
August 28, 2018
Revised:
March 13, 2019
Citation
Xiong, H., Hu, J., and Diao, X. (April 9, 2019). "Optimize Energy Efficiency of Quadrotors Via Arm Rotation." ASME. J. Dyn. Sys., Meas., Control. September 2019; 141(9): 091002. https://doi.org/10.1115/1.4043227
Download citation file:
Get Email Alerts
Design of Attack Resistant Robust Control Based on Intermediate Estimator Approach for Offshore Steel Jacket Structures
J. Dyn. Sys., Meas., Control (September 2025)
Associate Editor's Recognition
J. Dyn. Sys., Meas., Control (July 2025)
Related Articles
Energy-Optimal Unmanned Aerial Vehicles Motion Planning and Control Based on Integrated System Physical Dynamics
J. Dyn. Sys., Meas., Control (April,2023)
Design and Analysis of a Spherical Continuously Variable Transmission
J. Mech. Des (March,2002)
Taguchi Optimization of Triple-Tube ORC Evaporator for Enhanced CHP System Efficiency with Diverse Refrigerants
J. Thermal Sci. Eng. Appl (January,0001)
Toward Sustainable Manufacturing Facilities: Utilization of Solar Energy for Efficient Scheduling of Manufacturing Processes
J. Eng. Sustain. Bldgs. Cities (August,2023)
Related Proceedings Papers
Related Chapters
Energy-Efficiency Coverage Optimization for Heterogeneous Wireless Sensor Networks
International Conference on Advanced Computer Theory and Engineering (ICACTE 2009)
A System Level Energy-Efficient Wireless Communication System Design Based on Cross-Layer Optimization
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Thermal Management and Energy Efficiency
Thermal Management of Telecommunication Equipment, Second Edition