Skip Nav Destination
Oilwell Drilling Engineering
ISBN:
9780791861875
No. of Pages:
512
Publisher:
ASME Press
Publication date:
2019
Directional drilling refers to the process of drilling along a prescribed well path to a target located at a given depth and some lateral distance from a vertical axis through the drill site. To a large extent, directional drilling is like flying an airplane. A flight plan is established based on prevailing winds and weather conditions between point of departure and destination. Power is essential. The crew navigates and makes course changes when necessary. Directional drilling also requires a plan, which defines the road map or well path from surface location and target.
Topics:
Drilling
12.1
Applications of Directional Drilling
12.2Planning the Directional Well
12.3Well Path Navigation
12.4Tools for Directional Control
12.5Monitoring Well Bore Progress
12.6Friction in Directional Wells
12.7Friction in Curved Section
12.8Problems
12.9List of References
12.10Appendix
This content is only available via PDF.
You do not currently have access to this chapter.
Email alerts
Related Chapters
Study and Construction of Experiment Table of Drilling at Any Position of Rock Sample
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Signal Propagation and Attenuation of Electromagnetic Telemetry System for Measurement-While-Drilling
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)
Research on the Effect of XC and Clay on the Rheological Behavior of Gas Hydrate Drilling Fluids
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)
Study on Screw Drill Wear When Drilling Low Carbon Stainless Steel and Accompanying Phenomena in the Cutting Zone
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Related Articles
Publisher’s Note: “Experimental Evaluation of Separation Methods for a Riser Dilution Approach to Dual Density Drilling” [Journal Energy Resources Technology, 2011, 133, 031501]
J. Energy Resour. Technol (December,2011)
Drilling Action of Roller-Cone Bits: Modeling and Experimental Validation
J. Energy Resour. Technol (December,2010)
NETL Extreme Drilling Laboratory Studies High Pressure High Temperature Drilling Phenomena
J. Energy Resour. Technol (December,2008)