With the increase of production of electrical vehicles (EVs) and battery packs, lithium ion batteries inconsistency problem has drawn much attention. Lithium ion battery imbalance phenomenon exists during three different stages of life cycle. First stage is premanufacturing of battery pack i.e., during the design, the cells of similar performance need to be clustered to improve the performance of pack. Second is during the use of battery pack in EVs, batteries equalization is necessary. In the third stage, clustering of spent lithium ion batteries for reuse is also an important problem because of the great recycling challenge of lithium batteries. In this work, several clustering and equalization methods are compared and summarized for different stages. The methods are divided into the traditional methods and intelligent methods. The work also proposes experimental combined clustering analysis for new lithium-ion battery packs formation with improved electrochemical performance for electric vehicles. Experiments were conducted by dismantling of pack and measurement of capacity, voltage, and internal resistance data. Clustering analysis based on self-organizing map (SOM) neural networks is then applied on the measured data to form clusters of battery packs. The validation results conclude that the battery packs formed from the clustering analysis have higher electrochemical performance than randomly selected ones. In addition, a comprehensive discussion was carried out.
Skip Nav Destination
Article navigation
May 2019
Research-Article
Lithium-Ion Battery Packs Formation With Improved Electrochemical Performance for Electric Vehicles: Experimental and Clustering Analysis
Liu Yun,
Liu Yun
Intelligent Manufacturing Key Laboratory of
Ministry of Education,
Shantou University,
Guangdong, China
Ministry of Education,
Shantou University,
Guangdong, China
Search for other works by this author on:
Jayne Sandoval,
Jayne Sandoval
Intelligent Manufacturing Key Laboratory of
Ministry of Education,
Shantou University,
Guangdong, China;
Department of Mechanical Engineering,
Northern Arizona University,
Flagstaff, AZ 86011
Ministry of Education,
Shantou University,
Guangdong, China;
Department of Mechanical Engineering,
Northern Arizona University,
Flagstaff, AZ 86011
Search for other works by this author on:
Jian Zhang,
Jian Zhang
Intelligent Manufacturing Key Laboratory of
Ministry of Education,
Shantou University,
Guangdong, China
Ministry of Education,
Shantou University,
Guangdong, China
Search for other works by this author on:
Liang Gao,
Liang Gao
State Key Lab of Digital Manufacturing
Equipment and Technology,
School of Mechanical Science and Engineering,
Huazhong University of Science and Technology,
Wuhan 430074, China
e-mail: gaoliang@mail.hust.edu.cn
Equipment and Technology,
School of Mechanical Science and Engineering,
Huazhong University of Science and Technology,
Wuhan 430074, China
e-mail: gaoliang@mail.hust.edu.cn
Search for other works by this author on:
Akhil Garg,
Akhil Garg
Intelligent Manufacturing Key Laboratory
of Ministry of Education,
Shantou University,
Guangdong, China
of Ministry of Education,
Shantou University,
Guangdong, China
Search for other works by this author on:
Chin-Tsan Wang
Chin-Tsan Wang
Department of Mechanical
and Electro-Mechanical Engineering,
National ILan University,
ILan, Taiwan
and Electro-Mechanical Engineering,
National ILan University,
ILan, Taiwan
Search for other works by this author on:
Liu Yun
Intelligent Manufacturing Key Laboratory of
Ministry of Education,
Shantou University,
Guangdong, China
Ministry of Education,
Shantou University,
Guangdong, China
Jayne Sandoval
Intelligent Manufacturing Key Laboratory of
Ministry of Education,
Shantou University,
Guangdong, China;
Department of Mechanical Engineering,
Northern Arizona University,
Flagstaff, AZ 86011
Ministry of Education,
Shantou University,
Guangdong, China;
Department of Mechanical Engineering,
Northern Arizona University,
Flagstaff, AZ 86011
Jian Zhang
Intelligent Manufacturing Key Laboratory of
Ministry of Education,
Shantou University,
Guangdong, China
Ministry of Education,
Shantou University,
Guangdong, China
Liang Gao
State Key Lab of Digital Manufacturing
Equipment and Technology,
School of Mechanical Science and Engineering,
Huazhong University of Science and Technology,
Wuhan 430074, China
e-mail: gaoliang@mail.hust.edu.cn
Equipment and Technology,
School of Mechanical Science and Engineering,
Huazhong University of Science and Technology,
Wuhan 430074, China
e-mail: gaoliang@mail.hust.edu.cn
Akhil Garg
Intelligent Manufacturing Key Laboratory
of Ministry of Education,
Shantou University,
Guangdong, China
of Ministry of Education,
Shantou University,
Guangdong, China
Chin-Tsan Wang
Department of Mechanical
and Electro-Mechanical Engineering,
National ILan University,
ILan, Taiwan
and Electro-Mechanical Engineering,
National ILan University,
ILan, Taiwan
1Corresponding author.
Manuscript received May 18, 2018; final manuscript received November 17, 2018; published online January 18, 2019. Assoc. Editor: Bengt Sunden.
J. Electrochem. En. Conv. Stor. May 2019, 16(2): 021011 (11 pages)
Published Online: January 18, 2019
Article history
Received:
May 18, 2018
Revised:
November 17, 2018
Citation
Yun, L., Sandoval, J., Zhang, J., Gao, L., Garg, A., and Wang, C. (January 18, 2019). "Lithium-Ion Battery Packs Formation With Improved Electrochemical Performance for Electric Vehicles: Experimental and Clustering Analysis." ASME. J. Electrochem. En. Conv. Stor. May 2019; 16(2): 021011. https://doi.org/10.1115/1.4042093
Download citation file:
Get Email Alerts
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
A Hybrid Convolutional Neural Network-Long Short Term Memory for Discharge Capacity Estimation of Lithium-Ion Batteries
J. Electrochem. En. Conv. Stor (August,2022)
Power Batteries State of Health Estimation of Pure Electric Vehicles for Charging Process
J. Electrochem. En. Conv. Stor (August,2024)
Mechanical Properties of Prismatic Li-Ion Batteries—Electrodes, Cells, and Stacks
J. Electrochem. En. Conv. Stor (November,2022)
Influence of Deep-Discharge Rate on Recycle Process of High Energy Density Traction Batteries
J. Electrochem. En. Conv. Stor (May,2022)
Related Proceedings Papers
Related Chapters
Introduction
Ultrasonic Welding of Lithium-Ion Batteries
Concluding Remarks and Future Work
Ultrasonic Welding of Lithium-Ion Batteries
The Tricycle Robot: A Mobile Programmable ‘Drive-by-Wire’ Electric Vehicle
Precision Programming of Roving Robots: Project-Based Fundamentals of Wheeled, Legged and Hybrid Mobile Robots