In this study, detailed three-dimensional (3D) numerical simulations of intermittent multiphase flows were carried out to investigate the slug initiation process and various features of intermittent flows inside a horizontal pipe. Air and water are used as working fluids. The domain used for simulations is a 14.4 m long pipe with 54 mm inner diameter. The volume of fluid (VOF) model was used to capture the air/water interface and its temporal evolution. Using the developed computational fluid dynamics (CFD) model, the slug formation and propagation along horizontal circular pipe were successfully predicted and studied comprehensively. Slug length and the frequency of slug formation, as two main features of intermittent flow, were used to validate the model against experimental results and available correlations in the literature. Three-dimensional numerical simulation of intermittent flow proved to be a powerful tool in tackling limitations of experiments and providing detailed data about various features of the intermittent flow. The effect of gas and liquid superficial velocities on the liquid slug and elongated bubble length was explored. Moreover, the study revealed new findings related to the elongated bubble shape and velocity field in the slug unit.
Skip Nav Destination
Article navigation
December 2019
Research-Article
Simulation of Intermittent Flow Development in a Horizontal Pipe
Hamed Nasrfard,
Hamed Nasrfard
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: nasrfard.hamed@aut.ac.ir
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: nasrfard.hamed@aut.ac.ir
Search for other works by this author on:
Hassan Rahimzadeh,
Hassan Rahimzadeh
Professor
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: rahimzad@aut.ac.ir
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: rahimzad@aut.ac.ir
1Corresponding author.
Search for other works by this author on:
Ali Ahmadpour,
Ali Ahmadpour
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: Ali.ahmadpour@aut.ac.ir
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: Ali.ahmadpour@aut.ac.ir
Search for other works by this author on:
Ehsan Amani
Ehsan Amani
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: eamani@aut.ac.ir
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: eamani@aut.ac.ir
Search for other works by this author on:
Hamed Nasrfard
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: nasrfard.hamed@aut.ac.ir
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: nasrfard.hamed@aut.ac.ir
Hassan Rahimzadeh
Professor
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: rahimzad@aut.ac.ir
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: rahimzad@aut.ac.ir
Ali Ahmadpour
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: Ali.ahmadpour@aut.ac.ir
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: Ali.ahmadpour@aut.ac.ir
Ehsan Amani
Department of Mechanical Engineering,
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: eamani@aut.ac.ir
Amirkabir University of Technology,
Tehran 15875-4413, Iran
e-mail: eamani@aut.ac.ir
1Corresponding author.
Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received March 5, 2019; final manuscript received June 17, 2019; published online July 12, 2019. Assoc. Editor: Riccardo Mereu.
J. Fluids Eng. Dec 2019, 141(12): 121305 (10 pages)
Published Online: July 12, 2019
Article history
Received:
March 5, 2019
Revised:
June 17, 2019
Citation
Nasrfard, H., Rahimzadeh, H., Ahmadpour, A., and Amani, E. (July 12, 2019). "Simulation of Intermittent Flow Development in a Horizontal Pipe." ASME. J. Fluids Eng. December 2019; 141(12): 121305. https://doi.org/10.1115/1.4044069
Download citation file:
Get Email Alerts
Cited By
Related Articles
Surfactant Use for Slug Flow Pattern Suppression and New Flow Pattern Types in a Horizontal Pipe
J. Fluids Eng (January,2006)
Vertically Downward Two-Phase Slug Flow
J. Fluids Eng (December,1976)
Pressure Loss in a Horizontal Two-Phase Slug Flow
J. Fluids Eng (July,2010)
Related Chapters
A Level-Set Based Free-Surface Tracking Method for the Simulation of Bubble Collapse and Jetting in Generalized Newtonian Fluids
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Pressure Testing
Process Piping: The Complete Guide to ASME B31.3, Third Edition
Basics of Hydraulic Loops
Hydraulics, Pipe Flow, Industrial HVAC & Utility Systems: Mister Mech Mentor, Vol. 1