An examination of the condition of the flow leaving the impeller exit kinetic energy often accounts for 30–50% of the shaft work input to the compressor stage; for energy efficiency, it is important to recover as much of this as possible. This is the function of the diffuser, which follows the impeller. Effective pressure recovery downstream of an impeller is very important in order to realize a centrifugal compressor with a high efficiency and a high pressure ratio, and an appropriate selection of a diffuser for a specific impeller is a critical step in order to develop the compressor accordingly. The purpose of this study is to investigate the sensitivity of how compressor performances change as the vaned diffuser geometry is varied. Three kinds of vaned diffusers were studied and compared with its results. The first vaned diffuser type is based on a modified NACA airfoil, the second is a channel diffuser, and the third is a conformal transformation of NACA 65-(4A10)06 airfoil. A mean-line prediction method was applied to investigate the performance and stability for three kinds of diffusers. Computational fluid dynamic (CFD) analyses and a detailed interior flow pattern study have been done. In this study, the off-design behavior of three different types of diffusers, given by the mean-line prediction, was investigated using CFD results and the NACA 65 diffuser geometry, which satisfies a wider operating range and has a higher pressure recovery than the others, was selected. The numerical results were compared with experimental data for validation and showed good agreement.
Skip Nav Destination
e-mail: khw007@hhi.co.kr
Article navigation
January 2009
Research Papers
The Performance Evaluation With Diffuser Geometry Variations of the Centrifugal Compressor in a Marine Engine Turbocharger
Hong-Won Kim,
e-mail: khw007@hhi.co.kr
Hong-Won Kim
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, Korea
Search for other works by this author on:
Jong-II Park,
Jong-II Park
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, Korea
Search for other works by this author on:
Seung-Hyup Ryu,
Seung-Hyup Ryu
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, Korea
Search for other works by this author on:
Seong-Wook Choi,
Seong-Wook Choi
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, Korea
Search for other works by this author on:
Sang-Hak Ghal
Sang-Hak Ghal
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, Korea
Search for other works by this author on:
Hong-Won Kim
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, Koreae-mail: khw007@hhi.co.kr
Jong-II Park
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, Korea
Seung-Hyup Ryu
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, Korea
Seong-Wook Choi
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, Korea
Sang-Hak Ghal
Hyundai Industrial Research Institute
, Hyundai Heavy Industries Co., Ltd., 1, Jeonha-Dong, Dong-Gu, Ulsan 682-792, KoreaJ. Eng. Gas Turbines Power. Jan 2009, 131(1): 012201 (7 pages)
Published Online: October 14, 2008
Article history
Received:
April 3, 2008
Revised:
April 7, 2008
Published:
October 14, 2008
Citation
Kim, H., Park, J., Ryu, S., Choi, S., and Ghal, S. (October 14, 2008). "The Performance Evaluation With Diffuser Geometry Variations of the Centrifugal Compressor in a Marine Engine Turbocharger." ASME. J. Eng. Gas Turbines Power. January 2009; 131(1): 012201. https://doi.org/10.1115/1.2967733
Download citation file:
Get Email Alerts
Heat Release Characteristics of a Volatile, Oxygenated, and Reactive Fuel in a Direct Injection Engine
J. Eng. Gas Turbines Power
Comprehensive Life Cycle Analysis of Diverse Hydrogen Production Routes and Application on a Hydrogen Engine
J. Eng. Gas Turbines Power
Related Articles
Unsteady Flow in a Turbocharger Centrifugal Compressor: Three-Dimensional Computational Fluid Dynamics Simulation and Numerical and Experimental Analysis of Impeller Blade Vibration
J. Turbomach (July,2006)
Rotordynamic Force Prediction of Centrifugal Compressor Impellers Using Computational Fluid Dynamics
J. Eng. Gas Turbines Power (April,2011)
Numerical Optimization of a Vaned Shroud Design for Increased
Operability Margin in Modern Centrifugal Compressors
J. Turbomach (October,2006)
Spike and Modal Stall Inception in an Advanced Turbocharger Centrifugal Compressor
J. Turbomach (July,2009)
Related Proceedings Papers
Related Chapters
Introduction
Design and Analysis of Centrifugal Compressors
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students
Turbocompressors
Pumps and Compressors