Abstract

The effect of residual stress on the fatigue crack growth was investigated for cyclic tension. Three-point bend specimens were used with through thickness notches at the center line of the welded joint. The experiments were performed for different load amplitudes and load ratios under conditions of small-scale yielding. The influence of the residual stresses on fatigue crack growth was estimated by experimentally observed fatigue crack growth rate and measurement of residual stresses at the surface of specimen. This paper describes an approach taken in two models to estimate the residual stress effect on fatigue crack propagation and to predict remaining service life of a welded structure.

References

1.
Shi
,
Y. W.
,
Chen
,
B. Y.
, and
Zhang
,
J. X.
, “
Effects of Welding Residual Stresses on Fatigue Crack Growth Behaviour in Butt Welds of a Pipeline Steel
,”
Engineering Fracture Mechanics
 0013-7944, Vol.
36
, No.
6
,
1990
, pp.
893
-
902
.
2.
Ninh
,
N. T.
and
Wahab
,
M. A.
, “
The Effect of Residual Stress and Weld Geometry on the Improvement of Fatigue Life
,”
J. of Materials Processing Technology
, Vol.
48
,
1995
, pp.
581
-
588
.
3.
Dong
P.
, “
Residual Stresses in Aluminium-Lithium Welds and Effects on Structural Fabricability and Integrity
,”
Mathematical Modelling of Weld Phenomena
5
, H. Cerjak, Ed.,
2001
, pp.
507
-
528
.
4.
Parker
,
A. P.
, “
Stress Intensity Factors, Crack Profiles and Fatigue Crack Growth Rates in Residual Stress Fields
,”
Restdual Stress Effects in Fatigue
, ASTM STP 776,
ASTM International
,
West Conshohocken, PA
,
1982
, pp.
224
-
234
.
5.
Behini
,
M.
,
Bertini
,
L.
, and
Vitale
,
E.
, “
Fatigue Crack Growth in Residual Stress Fields: Experimental Results and Modelling
,”
Fatigue Fract. Eng. Mater. Struc.
, Vol.
17
, No.
12
,
1994
, pp.
1433
-
1444
6.
Wang
,
J.
,
Schneider
,
G.
, and
Vestergaard
,
V.
, “
Fatigue Crack Growth in Residual Stress Fields
,”
Annual Forum Proceedings of the American Helicopter Society
,
57th Annual Forum
, Vol.
57
,
2001
, pp.
429
-
434
7.
Pippan
,
R.
,
Reimelmoser
,
F. O.
,
Bichler
,
C.
, “
Measurability of Crack Closure
,”
Advances in Fatigue Crack Closure Measurement and Analysis: 2nd
, ASTM STP 1343,
R. C.
McClung
and
J. C.
Newman
, Jr.
, Eds.,
ASTM International
,
West Conshohocken, PA
,
1999
, pp.
41
-
56
.
8.
Josefson
,
B. L.
,
Svensson
,
T.
,
Ringsberg
,
J. W.
,
Gustafsson
,
T.
, and
de Mare
,
J.
, “
Fatigue Life and Crack Closure in Specimens Subjected to Variable Amplitude Loads under Plane Strain Conditions
,”
Engineering Fracture Mechanics
 0013-7944, Vol.
66
,
2000
, pp.
587
-
600
.
9.
Mochizuki
M.
and
Toyoda
M.
, “
Numerical Analysis of Residual Stress in Welded Structures Using Inherent Strain
,”
Mathematical Modelling of Weld Phenomena
5
,
H.
Cerjak
, Ed.,
2001
, pp.
549
-
580
.
10.
SINTAP: Structural Integrity Assessment Procedure
. Final Report. EU-Project BE 95-1462.
Brite Euram Program
, Brussels,
1999
.
11.
ASTM Standard E 647-99: “
Standard Test Method for Measurement of Fatigue Crack Growth Rates
,”
ASTM International
,
West Conshohocken, PA
,
1999
.
This content is only available via PDF.
You do not currently have access to this content.