Abstract
In its pursuit for providing smooth pavements, the Directorate General of Highways in Taiwan is developing and implementing ride quality specification as part of the construction assurance program. The straightedge and the profiler were used to measure pavement smoothness on 561 test sections. Probability distribution analysis showed that measurements of pavement smoothness of both devices follow the normal distribution. Smoothness specifications for construction quality control were developed for straightedge and profiler, respectively. The full-pay range is 1.36 to 2.45 mm and 2.16 to 3.65 m/km for straightedge and profiler, respectively. The smoothness relationship between straightedge and profiler was developed.
Issue Section:
Research Papers
References
1.
Janoff
, M. S.
, “Pavement Roughness and Rideability: A State-of-the-Art Review
.” J. Transp. Eng.
0733-947X, Vol. 108
, 1982
, pp. 662
-675
.2.
Hegmon
, R. R.
, “Some Results From Ongoing Research on Road Roughness
,” ASTM STP 1164, pp.14
-31
, ASTM
, Philadelphia
, 1992
.3.
Smith
, K. L.
, Smith
, K. D.
, Evans
, L. D.
, Hoerner
, T. E.
, and Darter
, M. I.
, “Smoothness Specifications for Pavements
,” NCHRP Web Document
1, National Research Council
, Washington, DC
, 1997
.4.
Perera
, R. W.
and Kohn
, S. D.
, Issues in Pavement Smoothness: A Summary Report
, NCHRP Web Document 42, National Research Council
, Washington, DC, 2002
.5.
Sayers
, M. W.
, “Profiles of Roughness
,” Transp. Res. Rec.
0361-1981, Vol. 1260
, 1990
, pp. 106
-111
.6.
Fernando
, E. G.
, “Development of a Profile-Based Smoothness Specification for Asphalt Concrete Overlay
,” Project Summary Report No. 1378-S, Texas Transportation Institute, Texas A&M University, College Station
, Texas, 1998
.7.
El-Korchi
, T.
, Bacon
, J.
, Turo
, M.
, and Ecmecian
, M.
“Ride Quality Assessment With Pavement Profiling Devices
,” Transp. Res. Rec.
0361-1981 Vol. 1806
, 2002
, pp. 140
-148
.8.
Walpole
, R. E.
, Myers
, R. H.
, and Myers
, S. L.
, Probability and Statistics for Engineers and Scientists
, 6th ed., Prentice Hall, Inc.
, NJ
, 1998
.9.
Johnson
, R. A.
, Probability and Statistics for Engineer
, 6th ed., Prentice Hall, Inc.
, NJ
, 2000
.10.
Devore
, J. L.
, Probability and Statistics for Engineering and Science
, 6th ed., Thomson Books
, New York
, 2003
.
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.