Abstract

Finite element modeling was used to relate the coring or cell configuration of brick to the heat flow through brick masonry wall systems. Core or cell configurations that minimize thermal bridging through the brick thickness substantially reduced the heat flow through the masonry. The effect of bed depth on heat flow was also investigated. Larger units with optimized coring designs resulted in substantial reductions in heat flow. Heat flow through the mortar joint was also compared to heat flow through the brick. Wall designs that minimize the mortar joint thickness also reduce the heat flow. From these simulations, it is clear that a masonry system can be optimized to reduce heat flow. The effect of core or cell filling with various materials was also studied. Insulating materials reduce heat flow primarily by displacing mortar in the cores or cells.

References

1.
ASTM C1232-09,
2009
, “
Standard Terminology for Masonry
,” Annual Book of ASTM Standards, Vol.
04.05
, ASTM International, West Conshohocken, PA.
2.
ASTM C652-09,
2009
, “
Standard Specification for Hollow Brick (Hollow Masonry Units Made from Clay or Shale)
,” Annual Book of ASTM Standards, Vol.
04.05
, ASTM International, West Conshohocken, PA.
3.
del Coz Diaz
,
J.
,
Garcia Nieto
,
P.
,
Martin Rodriguez
,
A.
,
Lozano Martinez-Luengas
,
A.
, and
Betegon Biempica
,
C.
, “
Non-Linear Thermal Analysis of Light Concrete Hollow Brick Walls by the Finite Element Method and Experimental Validation
,”
Appl. Therm. Eng.
 1359-4311, Vol.
26
,
2006
, pp.
777
786
. https://doi.org/10.1016/j.applthermaleng.2005.10.012
4.
Sala
,
J.
,
Urresti
,
A.
,
Martin
,
K.
,
Flores
,
I.
, and
Apaolaza
,
A.
, “
Static and Dynamic Thermal Characterisation of a Hollow Brick Wall
,”
Energy Build.
 0378-7788, Vol.
40
,
2008
, pp.
1513
1520
. https://doi.org/10.1016/j.enbuild.2008.02.011
5.
ASTM C518-04,
2009
, “
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
,” Annual Book of ASTM Standards, Vol.
04.06
, ASTM International, West Conshohocken, PA.
6.
ASTM C168-05a,
2009
, “
Standard Terminology Relating to Thermal Insulation
,” Annual Book of ASTM Standards, Vol.
04.06
, ASTM International, West Conshohocken, PA.
7.
Rimpel
,
E.
, “
Fillings in Vertically Performated Bricks and Their Effects on Thermal and Acoustic Insulation
,”
ZI—Annual, Annual for the Brick and Tile, Structural Ceramics and Clay Pipe Industries
,
Bauverlag BV GmBH
,
Gutersloh, Germany
,
2006
.
8.
Al-Hamzy
,
M.
, “
Analysis of Coupled Natural Convection-Conduction Effects on the Heat Transport Through Hollow Building Bricks
,”
Energy Build.
 0378-7788, Vol.
38
,
2006
, pp.
515
521
. https://doi.org/10.1016/j.enbuild.2005.08.010
9.
Bouchair
,
A.
, “
Steady State Theoretical Model of Fired Clay Hollow Bricks for Enhanced External Wall Thermal Insulation
,”
Build. Environ.
 0360-1323, Vol.
43
,
2008
, pp.
1603
1618
. https://doi.org/10.1016/j.buildenv.2007.10.005
10.
Al-Hadhrami
,
L.
and
Ahmad
,
A.
, “
Assessment of Thermal Performance of Different Types of Masonry Bricks Used in Saudi Arabia
,”
Appl. Therm. Eng.
 1359-4311, Vol.
29
,
2009
, pp.
1123
1130
. https://doi.org/10.1016/j.applthermaleng.2008.06.003
11.
BIA Technical Notes 43D—Brick Passive Solar Heating Systems—Part 4—Material Properties
,
Brick Industry Association
,
Reston, VA
,
1988
.
12.
del Coz Diaz
,
J.
,
Garcia Nieto
,
P.
,
Suarez Sierra
,
J.
, and
Penuelas Sanchez
,
I.
, “
Non-Linear Thermal Optimization and Design Improvement of New Internal Light Concrete Multi-Holed Brick Walls by FEM
,”
Appl. Therm. Eng.
 1359-4311, Vol.
28
,
2008
, pp.
1090
1100
. https://doi.org/10.1016/j.applthermaleng.2007.06.023
13.
BIA Technical Notes 4—Heat Transfer Coefficients of Brick Masonry Walls
,
Brick Industry Association
,
Reston, VA
,
1997
.
14.
ASHRAE Handbook: Fundamentals
,
American Society of Heating, Refrigeration and Air-Conditioning Engineers
,
Atlanta, GA
,
2009
, Chap. 26, pp. 26.5–26.9.
This content is only available via PDF.
You do not currently have access to this content.