Skip Nav Destination
Issues
Research Papers
The Effect of Load Reduction Scheme on Crack Closure in the Near-Threshold Regime
J. ASTM Int.. June 2005, 2(6): 1–10.
doi: https://doi.org/10.1520/JAI11988
Selection of Material for Welded Steel Structures Based on Fracture Mechanics
J. ASTM Int.. June 2005, 2(6): 1–15.
doi: https://doi.org/10.1520/JAI11999
A New Method for Opening Load Determination from Compliance Measurements
J. ASTM Int.. June 2005, 2(6): 1–12.
doi: https://doi.org/10.1520/JAI12017
Assessment for Decrease in Threshold Stress Intensity Factor (SIF) Range Due to High Maximum SIF
J. ASTM Int.. June 2005, 2(6): 1–13.
doi: https://doi.org/10.1520/JAI12027
Notch-Root Elastic-Plastic Strain-Stress in Particulate Metal Matrix Composites Subjected to General Loading Conditions
J. ASTM Int.. June 2005, 2(6): 1–16.
doi: https://doi.org/10.1520/JAI12037
Assessment of Plane Stress Tearing in Terms of Various Crack Driving Parameters
J. ASTM Int.. June 2005, 2(6): 1–21.
doi: https://doi.org/10.1520/JAI12045
Characterization and Analytical Application of the Ion-Association Complex of Nickel with Alizarin Yellow R and Eosin
J. ASTM Int.. June 2005, 2(6): 1–8.
doi: https://doi.org/10.1520/JAI12222
The Effect of Beta-Quenching in Final Dimension on the Irradiation Growth of Tubes and Channels
M Dahlbäck, M Limbäck, L Hallstadius, P Barberis, G Bunel, C Simonot, T Andersson, P Askeljung, J Flygare, B Lehtinen, AR Massih
J. ASTM Int.. June 2005, 2(6): 1–28.
doi: https://doi.org/10.1520/JAI12337
Improved ZIRLOTM Cladding Performance through Chemistry and Process Modifications
J. ASTM Int.. June 2005, 2(6): 1–16.
doi: https://doi.org/10.1520/JAI12344
Shadow Corrosion Mechanism of Zircaloy
J. ASTM Int.. June 2005, 2(6): 1–17.
doi: https://doi.org/10.1520/JAI12374
TEM Examinations of the Metal-Oxide Interface of Zirconium Based Alloys Irradiated in a Pressurized Water Reactor
J. ASTM Int.. June 2005, 2(6): 1–25.
doi: https://doi.org/10.1520/JAI12390
Failure of Hydrided Zircaloy-4 Under Equal-Biaxial and Plane-Strain Tensile Deformation
J. ASTM Int.. June 2005, 2(6): 1–16.
doi: https://doi.org/10.1520/JAI12441
Mechanical Properties of Zircaloy-4 PWR Fuel Cladding with Burnup 54-64MWd/kgU and Implications for RIA Behavior
J. ASTM Int.. June 2005, 2(6): 1–20.
doi: https://doi.org/10.1520/JAI12465
Performance of a New Co-Polymer Sulfonate-Based Mid-Range Water-Reducing Admixture
J. ASTM Int.. June 2005, 2(6): 1–23.
doi: https://doi.org/10.1520/JAI12470
Residual Stress Measurements in Welded and Plastically Deformed Target Structural Materials
J. ASTM Int.. June 2005, 2(6): 1–13.
doi: https://doi.org/10.1520/JAI12564
Super Elastic Functional β Titanium Alloy with Low Young's Modulus for Biomedical Applications
J. ASTM Int.. June 2005, 2(6): 1–16.
doi: https://doi.org/10.1520/JAI12818
Acoustic ‘Distributed Source’ Mixing of Smallest Fluid Volumes
J. ASTM Int.. June 2005, 2(6): 1–8.
doi: https://doi.org/10.1520/JAI12829
Evaluation of Fatigue Crack Thresholds Using Various Experimental Methods
J. ASTM Int.. June 2005, 2(6): 1–16.
doi: https://doi.org/10.1520/JAI12847
A Preliminary Mathematical Removal-Rate Model for Si CMP
J. ASTM Int.. June 2005, 2(6): 1–11.
doi: https://doi.org/10.1520/JAI12895
Factors Influencing the Performance of Spray Delivery Systems: A Review of Recent Developments
J. ASTM Int.. June 2005, 2(6): 1–13.
doi: https://doi.org/10.1520/JAI12900
Increasing the Biological Activity of Weak Acid Herbicides by Increasing and Decreasing the pH of the Spray Mixture
J. ASTM Int.. June 2005, 2(6): 1–10.
doi: https://doi.org/10.1520/JAI12907
Influence of Clethodim Formulation and Oil Adjuvants on Weed Control and Overcoming Herbicide Antagonism
J. ASTM Int.. June 2005, 2(6): 1–7.
doi: https://doi.org/10.1520/JAI12917
Fatty Amine Alkoxylates as Effective Adjuvants for Strobilurin Fungicide Applications on Field and Orchard Crops
J. ASTM Int.. June 2005, 2(6): 1–7.
doi: https://doi.org/10.1520/JAI12925
Fluorescent Intensity of Dye Solutions under Different pH Conditions
J. ASTM Int.. June 2005, 2(6): 1–7.
doi: https://doi.org/10.1520/JAI12926
The Effect of Ammonium Nitrate, Coarse/Fine Ammonium Nitrate Ratio, Plasticizer, Bonding Agent, and Fe2O3 Content on Ballistic and Mechanical Properties of Hydroxyl Terminated Polybutadiene Based Composite Propellants Containing 20 % AP
J. ASTM Int.. June 2005, 2(6): 1–13.
doi: https://doi.org/10.1520/JAI12933
Impact of Sulfate Contamination on Swelling Behavior of Lime-Stabilized Clays
J. ASTM Int.. June 2005, 2(6): 1–10.
doi: https://doi.org/10.1520/JAI13063
Wear Behavior of Niobium Boride Coatings
J. ASTM Int.. June 2005, 2(6): 1–12.
doi: https://doi.org/10.1520/JAI13083
Determination of Total Mercury in Crude Oil by Combustion Cold Vapor Atomic Absorption Spectrometry (CVAAS)
J. ASTM Int.. June 2005, 2(6): 1–11.
doi: https://doi.org/10.1520/JAI13089
Dynamic Modelling and Simulation of Squirrel-Cage Asynchronous Machine with Non-Linear Effects
J. ASTM Int.. June 2005, 2(6): 1–16.
doi: https://doi.org/10.1520/JAI14018
A Prospective Study of Injuries in NCAA Intercollegiate Ice-Hockey Goaltenders
J. ASTM Int. (March 2009)
Stabilization of Suspension Concentrate Formulations via Specialized Double-comb Polymers
J. ASTM Int. (June 2009)
Crack Closure Behavior on a Variety of Materials under High Stress Ratios and Kmax Test Conditions
J. ASTM Int. (February 2012)
