Skip Nav Destination
Issues
Research Papers
Retrieval Analysis of Total Disc Replacements: Implications for Standardized Wear Testing
J. ASTM Int.. June 2006, 3(6): 1–12.
doi: https://doi.org/10.1520/JAI100252
Application of the Normalization Method to Dynamic Fracture Toughness Testing of Alloy 718
J. ASTM Int.. June 2006, 3(6): 1–14.
doi: https://doi.org/10.1520/JAI100337
Elastic T-Stress Solutions of Embedded Elliptical Cracks Subjected to Uniaxial and Biaxial Loadings
J. ASTM Int.. June 2006, 3(6): 1–14.
doi: https://doi.org/10.1520/JAI100347
Calculation of Neutron Fluxes for Radioactive Inventory Assessment of Magnox Power Plant
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI100364
Functional Properties of Nanostructured Ti-50.0 at % Ni Alloys
J. ASTM Int.. June 2006, 3(6): 1–11.
doi: https://doi.org/10.1520/JAI100383
FDA Recommendations for Nitinol Stent and Endovascular Graft Fatigue Characterization and Fracture Reporting
J. ASTM Int.. June 2006, 3(6): 1–7.
doi: https://doi.org/10.1520/JAI100384
Estimation of the Osteolytic Potential of Noncrosslinked and Crosslinked Polyethylenes and Ceramic-on-Ceramic Total Hip Prostheses
J. ASTM Int.. June 2006, 3(6): 1–16.
doi: https://doi.org/10.1520/JAI100558
An Evaluation of Aerosol- and Liquid-Generated Silica Samples for Proficiency Analytical Testing
J. ASTM Int.. June 2006, 3(6): 1–7.
doi: https://doi.org/10.1520/JAI12243
Development of a Fastener Structural Element Test for Certifying Navy Fastener Materials
J. ASTM Int.. June 2006, 3(6): 1–14.
doi: https://doi.org/10.1520/JAI13067
Use of Optical Imaging/Image Analysis System for the Quantitative Analysis of Surface Changes Induced by Outdoor Weathering on Sealants
J. ASTM Int.. June 2006, 3(6): 1–11.
doi: https://doi.org/10.1520/JAI13122
An Experimental and Numerical Study of the Fracture Strength of Welded Structural Hollow Section X-Joints
J. ASTM Int.. June 2006, 3(6): 1–14.
doi: https://doi.org/10.1520/JAI13183
Detection of Crack Initiation by Observations of Free Surface Condition
J. ASTM Int.. June 2006, 3(6): 1–10.
doi: https://doi.org/10.1520/JAI13189
Constraint Corrected J-R- Curve and Its Application to Fracture Assessment for X80 Pipelines
J. ASTM Int.. June 2006, 3(6): 1–17.
doi: https://doi.org/10.1520/JAI13209
Development of a Circumferentially Throughwall Cracked Tube Specimen for Fatigue Crack Growth Rate Tests
J. ASTM Int.. June 2006, 3(6): 1–13.
doi: https://doi.org/10.1520/JAI13210
Observations on Photo-Emission and the Process Zone of a Fatigue Crack
J. ASTM Int.. June 2006, 3(6): 1–9.
doi: https://doi.org/10.1520/JAI13222
Electrokinetic Dewatering and Sedimentation of Dredged Contaminated Sediment
J. ASTM Int.. June 2006, 3(6): 1–6.
doi: https://doi.org/10.1520/JAI13305
Remediation Technology for Boron and Fluoride Contaminated Sediments Using Green Plants
J. ASTM Int.. June 2006, 3(6): 1–7.
doi: https://doi.org/10.1520/JAI13306
Electrokinetically Enhanced Settlement and Remediation of Contaminated Sediment
J. ASTM Int.. June 2006, 3(6): 1–13.
doi: https://doi.org/10.1520/JAI13307
An Investigation of the Heaving Mechanism Related to Chromite Ore Processing Residue
J. ASTM Int.. June 2006, 3(6): 1–10.
doi: https://doi.org/10.1520/JAI13309
Investigation of Barium Treatment of Chromite Ore Processing Residue (COPR) 031
M Chrysochoou, M.Sc., D Dermatas, Ph.D., DH Moon, Ph.D., C Christodoulatos, Ph.D., M Wazne, Ph.D., C French, J Morris, M Kaouris
J. ASTM Int.. June 2006, 3(6): 1–11.
doi: https://doi.org/10.1520/JAI13314
Development of Filtration System for Removal of Contaminated Suspended Solids in an Enclosed Sea Area
J. ASTM Int.. June 2006, 3(6): 1–10.
doi: https://doi.org/10.1520/JAI13319
A Combined Method: Precipitation and Capping, to Attenuate Eutrophication in Canadian Lakes
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI13321
Development of an In Situ Biodegradation Technology by Using Anaerobic Micro-Organisms for Sediment Contaminated with Dioxins
J. ASTM Int.. June 2006, 3(6): 1–10.
doi: https://doi.org/10.1520/JAI13322
Permeability Characteristics of Lake Kojima Sediment and Their Improvement
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI13327
Monitoring Heavy Metal Transport in Aquifer Based on Electrical Property Measurements
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI13330
Development of an Acoustical Method for Measuring the Transition Layer of Surficial Marine Sediments
J. ASTM Int.. June 2006, 3(6): 1–10.
doi: https://doi.org/10.1520/JAI13331
Modeling TPH Desorption in Unconsolidated Dune Sand during Remediation Using Dual-Equilibrium Desorption (DED) Model
J. ASTM Int.. June 2006, 3(6): 1–7.
doi: https://doi.org/10.1520/JAI13334
Cadmium Transport in Volcanic Ash Soil During Citric Acid Solution Flow
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI13336
Effect of Dispersivity of Filling Material on Performance of Contaminant Barrier
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI13340
Effects of Salt on the Sorption of Lead by Marine Clay in Column Tests
J. ASTM Int.. June 2006, 3(6): 1–10.
doi: https://doi.org/10.1520/JAI13341
Groundwater Flow and Arsenic Contamination Analyses in Southern Bangladesh
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI13357
Evaluation of Diamond Detectors for Fast Neutron Fluence Measurements in WWER-1000 Surveillance Assemblies
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI13437
Shielding Calculations for the Upgrade of the HFIR HB 2 Beam Line
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI13462
Residue Analysis on RPVOT Test Samples for Single and Multiple Antioxidants Chemistry for Turbine Lubricants
J. ASTM Int.. June 2006, 3(6): 1–15.
doi: https://doi.org/10.1520/JAI13508
Fires in P-3 Aircraft Oxygen Systems
J. ASTM Int.. June 2006, 3(6): 1–13.
doi: https://doi.org/10.1520/JAI13562
A Comprehensive Examination of the Internal Angle of Gyration for the Superpave Gyratory Compactor
J. ASTM Int.. June 2006, 3(6): 1–13.
doi: https://doi.org/10.1520/JAI13639
Tweaking the System: Modifications to the Superpave Mix Design System
J. ASTM Int.. June 2006, 3(6): 1–8.
doi: https://doi.org/10.1520/JAI13643
Study of Vacuum Carbon-Deoxidization of High Carbon Chromium Bearing Steel
J. ASTM Int.. June 2006, 3(6): 1–6.
doi: https://doi.org/10.1520/JAI14024
Cleanliness of Bearing Steels and Fatigue Life of Rolling Contacts
J. ASTM Int.. June 2006, 3(6): 1–6.
doi: https://doi.org/10.1520/JAI14040
New Development in Through Hardened Bearing Steel Grades for Use in Contaminated Lubrication
J. ASTM Int.. June 2006, 3(6): 1–9.
doi: https://doi.org/10.1520/JAI14045
Evaluation of Methodologies Used for Establishing Soil-Water Characteristic Curve
J. ASTM Int.. June 2006, 3(6): 1–11.
doi: https://doi.org/10.1520/JAI14084
The Effects of Implant Temperature on Lubricant Protein Precipitation and Polyethylene Wear in Joint Simulation Studies
J. ASTM Int.. June 2006, 3(6): 1–6.
doi: https://doi.org/10.1520/JAI14178
Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates
J. ASTM Int. (January 2008)
Effects of Contamination on Aerospace Hydraulic Component and System Performance
J. ASTM Int. (October 2008)
Promoted Metals Combustion at Ambient and Elevated Temperatures
J. ASTM Int. (June 2006)
Electrical Conductance Methods for Locating Leaks in Roofing and Waterproof Membranes
J. ASTM Int. (October 2011)
