Skip Nav Destination
Issues
Research Papers
Slip Velocity Direction Impacts Wear in Total Knee Arthropolasty
J. ASTM Int.. July 2006, 3(7): 1–5.
doi: https://doi.org/10.1520/JAI100250
Oxidation Testing of Long-Life Turbine Oil Fluids. Can We Do Better?
J. ASTM Int.. July 2006, 3(7): 1–9.
doi: https://doi.org/10.1520/JAI100263
A Robust Structural Stress Parameter for Evaluation of Multiaxial Fatigue of Weldments
J. ASTM Int.. July 2006, 3(7): 1–17.
doi: https://doi.org/10.1520/JAI100348
Feasibility Study on a Simple Method of Retrospective Neutron Dosimetry for Reactor Internals and Reactor Vessel
J. ASTM Int.. July 2006, 3(7): 1–8.
doi: https://doi.org/10.1520/JAI100359
Perchlorate Accumulation and Potential Exposure from Durum Wheat Irrigated with Colorado River Water
J. ASTM Int.. July 2006, 3(7): 1–6.
doi: https://doi.org/10.1520/JAI100397
Functional and Release Characteristics of Alpine Ski Equipment
J. ASTM Int.. July 2006, 3(7): 1–10.
doi: https://doi.org/10.1520/JAI100408
Effect of Microstructure on Pit-to-Crack Transition of 7075-T6 Aluminum Alloy
J. ASTM Int.. July 2006, 3(7): 1–10.
doi: https://doi.org/10.1520/JAI100485
Probing the Elastic-Plastic, Time-Dependent Stress Response of Test Fasteners Using Finite Element Analysis
J. ASTM Int.. July 2006, 3(7): 1–10.
doi: https://doi.org/10.1520/JAI13073
Elasto-Viscoplastic Behavior of the Ferritic Stainless Steel AISI 441-EN 1.4509 from Room Temperature to 850°C
J. ASTM Int.. July 2006, 3(7): 1–6.
doi: https://doi.org/10.1520/JAI13197
Mechanistic Studies of High-Temperature Crack Initiation in Single Crystal Materials
J. ASTM Int.. July 2006, 3(7): 1–12.
doi: https://doi.org/10.1520/JAI13219
Asymptotic Stress Fields for Thermomechanically Loaded Cracks in FGMs
J. ASTM Int.. July 2006, 3(7): 1–12.
doi: https://doi.org/10.1520/JAI13237
Chromite Ore Processing Residue (COPR): Hazardous Contaminated Soil or Solid Waste?
J. ASTM Int.. July 2006, 3(7): 1–10.
doi: https://doi.org/10.1520/JAI13313
Effect of Acid Treatment Agent of Sea Laver on Geoenvironmental Properties of Tidal Flat Muds in the Ariake Sea
J. ASTM Int.. July 2006, 3(7): 1–8.
doi: https://doi.org/10.1520/JAI13315
Disposal of Dredged Material in a Local Confined Disposal Facility: Budgeting and Accounting of Contaminant Transport
J. ASTM Int.. July 2006, 3(7): 1–13.
doi: https://doi.org/10.1520/JAI13317
Contamination of Sediments and Proposed Containment Technique in a Wood Pool in Shimizu, Japan
J. ASTM Int.. July 2006, 3(7): 1–12.
doi: https://doi.org/10.1520/JAI13318
Material Behavior of Dredged Contaminated Sediments from Simple Laboratory and Oedometer Tests
J. ASTM Int.. July 2006, 3(7): 1–10.
doi: https://doi.org/10.1520/JAI13323
Efficiency of Arsenic Removal Unit Working in Bangladesh and Cement Stabilization of Its Sludge
J. ASTM Int.. July 2006, 3(7): 1–9.
doi: https://doi.org/10.1520/JAI13324
Consolidation Yield Stress of Osaka-Bay Pleistocene Clay with Reference to Calcium Carbonate Contents
J. ASTM Int.. July 2006, 3(7): 1–9.
doi: https://doi.org/10.1520/JAI13325
Biochemical Effects on the Long-Term Mobility of Heavy Metals in Marine Clay at Coastal Landfill Sites
J. ASTM Int.. July 2006, 3(7): 1–13.
doi: https://doi.org/10.1520/JAI13326
Current Status of Estrogenlike Compounds in Sediments in Enclosed Sea Areas
J. ASTM Int.. July 2006, 3(7): 1–8.
doi: https://doi.org/10.1520/JAI13328
The Temporal and Spatial Dynamics of Trace Metals in Sediments of a Highly Urbanized Watershed
J. ASTM Int.. July 2006, 3(7): 1–11.
doi: https://doi.org/10.1520/JAI13332
Evaluation of the Removal of Heavy Metals from Contaminated Sediment in Continuous Flow Tests with Selective Sequential Extraction
J. ASTM Int.. July 2006, 3(7): 1–10.
doi: https://doi.org/10.1520/JAI13337
Seawater Quality, Suspended Solids, and Settling Particles in the Wood Pool Area of Shimizu Port, Japan
J. ASTM Int.. July 2006, 3(7): 1–13.
doi: https://doi.org/10.1520/JAI13346
Effect of Specimen Size on Consolidation Parameters of Marine Clay Deposits
J. ASTM Int.. July 2006, 3(7): 1–13.
doi: https://doi.org/10.1520/JAI13348
Microstructure, Strength, and Consolidation Properties of Ariake Clay Deposits Obtained from Samplers
J. ASTM Int.. July 2006, 3(7): 1–8.
doi: https://doi.org/10.1520/JAI13349
Transport Phenomena of Volatile Solute in Soil during Bioventing Technology
J. ASTM Int.. July 2006, 3(7): 1–6.
doi: https://doi.org/10.1520/JAI13351
Applicability of Cement-Stabilized Mud Soil as Embankment Material
J. ASTM Int.. July 2006, 3(7): 1–21.
doi: https://doi.org/10.1520/JAI13354
Environmental Monitoring of the Sediment Pollution along the Thai:Laos Mekong
J. ASTM Int.. July 2006, 3(7): 1–8.
doi: https://doi.org/10.1520/JAI13374
Benchmarking of PENTRAN-SSN Parallel Transport Code and FAST Preconditioning Algorithm Using the VENUS-2 MOX-Fueled Benchmark Problem
J. ASTM Int.. July 2006, 3(7): 1–10.
doi: https://doi.org/10.1520/JAI13428
A Beam-Monitor System for Neutrons and Gamma Rays in the Medical Irradiation Facility of the Kyoto University Research Reactor
J. ASTM Int.. July 2006, 3(7): 1–6.
doi: https://doi.org/10.1520/JAI13432
Spallation Radiation Damage Calculations and Database: Cross-Section Discrepancies between the Codes
J. ASTM Int.. July 2006, 3(7): 1–8.
doi: https://doi.org/10.1520/JAI13467
Proton Induced Activation in Mercury: Comparison of Measurements and Calculations
J. ASTM Int.. July 2006, 3(7): 1–8.
doi: https://doi.org/10.1520/JAI13469
Radiation Dosimetry in the BNCT Patient Treatment Room at the Brookhaven Medical Research Reactor
J. ASTM Int.. July 2006, 3(7): 1–7.
doi: https://doi.org/10.1520/JAI13475
Characterization of the Neutron Field in the HSSI Reusable Irradiation Facility at the Ford Nuclear Reactor
J. ASTM Int.. July 2006, 3(7): 1–8.
doi: https://doi.org/10.1520/JAI13482
Coarse-Mesh Adjoint Biasing of a Monte Carlo Dose Calculation
J. ASTM Int.. July 2006, 3(7): 1–10.
doi: https://doi.org/10.1520/JAI13488
Seismic Evaluation of Low-Rise Reinforced Masonry Buildings with Flexible Diaphragms
J. ASTM Int.. July 2006, 3(7): 1–38.
doi: https://doi.org/10.1520/JAI13661
The Lasting Effect of Sand Capping Techniques on Nutrient Release Reduction from Contaminated Sediments in Tokyo Bay
J. ASTM Int.. July 2006, 3(7): 1–8.
doi: https://doi.org/10.1520/JAI13887
Statistical Analysis of Nonmetallic Inclusions for the Estimation of Rolling Contact Fatigue Range and Quality Control of Bearing Steel
J. ASTM Int.. July 2006, 3(7): 1–17.
doi: https://doi.org/10.1520/JAI14039
X-ray Microdiffraction for the Analysis of Bearing Operation Conditions
J. ASTM Int.. July 2006, 3(7): 1–7.
doi: https://doi.org/10.1520/JAI14058
Practical Means for Determination of the Tensile Behavior of Ultra-High Performance Concrete
J. ASTM Int. (September 2006)
Electrical and Mechanical Properties of Conducive Carbon Black/Polyolefin Composites Mixed With Carbon Fiber
J. ASTM Int. (November 2006)
Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates
J. ASTM Int. (January 2008)
Pretreatment of Douglas Fir Wood Biomass for Improving Saccharification Efficiencies
J. ASTM Int. (April 2010)