Skip Nav Destination
Issues
February 2012
ISSN 1546-962X
In this Issue
Research Papers
Early Instability with Mobile Bearing Total Knee Arthroplasty: A Series of Twenty-Five Cases
J. ASTM Int.. February 2012, 9(2): 1–9.
doi: https://doi.org/10.1520/JAI103130
31 Year Evolution of the Rotating-Platform Total Knee Replacment: Coping With “Spinout” and Wear
J. ASTM Int.. February 2012, 9(2): 1–14.
doi: https://doi.org/10.1520/JAI103329
Comparison of the Laser and Electron Beam Welding of Steel Sheets Treated by Nitro-Oxidation
J. ASTM Int.. February 2012, 9(2): 1–10.
doi: https://doi.org/10.1520/JAI103375
Adhesion of Thermally Sprayed Metallic Coating
J. ASTM Int.. February 2012, 9(2): 1–11.
doi: https://doi.org/10.1520/JAI103414
Mechanical and Microstrutural Characterization of Weldments of Ferritic Stainless Steel AISI 444 Using Austenitic Stainless Steels Filler Metals
Pedro Duarte Antunes, Edmilson Otoni Corrêa, Nancy Delducca Barbedo, Paola de Oliveira Souza, José Luiz Gonçalves, Adriana Amaro Diacenco
J. ASTM Int.. February 2012, 9(2): 1–9.
doi: https://doi.org/10.1520/JAI103436
Evaluation of Plasma Transferred Arc Fe-Al Alloyed Coatings
J. ASTM Int.. February 2012, 9(2): 1–11.
doi: https://doi.org/10.1520/JAI103454
Morphology of γ′ Precipitates in a First Stage Low Pressure Turbine Blade of a Ni-Based Superalloy after Service and after Following Aging
J. ASTM Int.. February 2012, 9(2): 1–9.
doi: https://doi.org/10.1520/JAI103463
Vertebrectomy Model for the Mechanical Assessment of Fusionless Scoliosis Growth Rods
J. ASTM Int.. February 2012, 9(2): 1–7.
doi: https://doi.org/10.1520/JAI103493
Kinematic Stability Evaluation of Spinal Fusion Devices by Synthetic FSU Model
J. ASTM Int.. February 2012, 9(2): 1–8.
doi: https://doi.org/10.1520/JAI103496
Wear Simulation of Total Disc Arthroplasties: Sensitivity to Device Design and Test Parameters
J. ASTM Int.. February 2012, 9(2): 1–10.
doi: https://doi.org/10.1520/JAI103497
The Use of a Single-Level Construct Model to Evaluate Nonmetallic “Flexible” Rods
J. ASTM Int.. February 2012, 9(2): 1–13.
doi: https://doi.org/10.1520/JAI103500
A Method to Test Anterior-Posterior Construct Shear Fatigue Based on the Vertebrectomy Model
J. ASTM Int.. February 2012, 9(2): 1–7.
doi: https://doi.org/10.1520/JAI103505
ASTM F2624—Evaluating Alternate Fixtures for Flexion/Extention, Lateral Bending, and Axial Rotation Testing of Extra Discal Motion Preserving Implants
J. ASTM Int.. February 2012, 9(2): 1–9.
doi: https://doi.org/10.1520/JAI103510
Rationale of a Test Setup with a Defined COR for Extra-Discal Motion-Preserving Implants with a Low Implant Stiffness
J. ASTM Int.. February 2012, 9(2): 1–13.
doi: https://doi.org/10.1520/JAI103537
Microstructural Characterization of Layers Produced by Plasma Nitriding on Austenitic and Superaustenitic Stainless Steel Grades
J. ASTM Int.. February 2012, 9(2): 1–11.
doi: https://doi.org/10.1520/JAI103564
Clinical Results of a Total Knee Prosthesis with Floating Platform at 5.5 Years
J. ASTM Int.. February 2012, 9(2): 1–7.
doi: https://doi.org/10.1520/JAI103630
Sustainable Use of Oil Sands for Geotechnical Construction and Road Building
J. ASTM Int.. February 2012, 9(2): 1–15.
doi: https://doi.org/10.1520/JAI103651
Moisture and Rutting Resistances of Foamed Asphalt Mixtures Containing Recycled Coal Ash or Shingles With Moist Aggregates
J. ASTM Int.. February 2012, 9(2): 1–11.
doi: https://doi.org/10.1520/JAI103660
Sustainable Piling Made of Recycled Polymers: State of the Art Review
J. ASTM Int.. February 2012, 9(2): 1–15.
doi: https://doi.org/10.1520/JAI103677
Influence of Recovery Processes on Properties of Binders and Aggregates Recovered from Recycled Asphalt Pavement
J. ASTM Int.. February 2012, 9(2): 1–18.
doi: https://doi.org/10.1520/JAI103679
Dynamic Behavior of Sand/Rubber Mixtures. Part I: Effect of Rubber Content and Duration of Confinement on Small-Strain Shear Modulus and Damping Ratio
Anastasios Anastasiadis, Kostas Senetakis, Kyriazis Pitilakis, Chrysanthi Gargala, Iphigeneia Karakasi
J. ASTM Int.. February 2012, 9(2): 1–19.
doi: https://doi.org/10.1520/JAI103680
Case Study to Promote the Use of Industrial Byproducts: The Relevance of Performance Tests
J. ASTM Int.. February 2012, 9(2): 1–18.
doi: https://doi.org/10.1520/JAI103705
Dynamic Behavior of Sand/Rubber Mixtures, Part II: Effect of Rubber Content on G/GO-γ-DT Curves and Volumetric Threshold Strain
J. ASTM Int.. February 2012, 9(2): 1–12.
doi: https://doi.org/10.1520/JAI103711
Laboratory and Field Evaluation of Cement-Treated Reclaimed Asphalt Pavement Blends as Roadway Base Material
J. ASTM Int.. February 2012, 9(2): 1–12.
doi: https://doi.org/10.1520/JAI103714
Engineering Properties of Cement–Treated Granular Soil for Geotechnical Application
J. ASTM Int.. February 2012, 9(2): 1–15.
doi: https://doi.org/10.1520/JAI103733
Sawdust Ash Stabilization of Reclaimed Asphalt Pavement
J. ASTM Int.. February 2012, 9(2): 1–10.
doi: https://doi.org/10.1520/JAI103751
Feasibility Study on Building-Derived Concrete Debris for Use in Highway Construction
J. ASTM Int.. February 2012, 9(2): 1–11.
doi: https://doi.org/10.1520/JAI103753
Use of Post-Consumer Corrugated Fiberboard as Fine Aggregate Replacement in Controlled Low-Strength Materials
J. ASTM Int.. February 2012, 9(2): 1–12.
doi: https://doi.org/10.1520/JAI103843
Roller Profile Development for an Axially Loaded, Single Row Spherical Roller Bearing in an Oscillating Application
J. ASTM Int.. February 2012, 9(2): 1–17.
doi: https://doi.org/10.1520/JAI103891
Stability of Metallic Glasses: Criteria and Prediction of Ductile-Brittle Transition and Crystallization
J. ASTM Int.. February 2012, 9(2): 1–17.
doi: https://doi.org/10.1520/JAI103936
Point Load Weight Functions for Semi-Elliptical Cracks in Finite Thickness Plate
J. ASTM Int.. February 2012, 9(2): 1–14.
doi: https://doi.org/10.1520/JAI103962
Crack Closure Behavior on a Variety of Materials under High Stress Ratios and Kmax Test Conditions
J. ASTM Int.. February 2012, 9(2): 1–12.
doi: https://doi.org/10.1520/JAI103973
Effect of Chemical Modification of Al-Si Alloys on Thermal Diffusivity and Contact Heat Transfer at the Casting–Chill Interface
J. ASTM Int.. February 2012, 9(2): 1–10.
doi: https://doi.org/10.1520/JAI104057
Intensive Quenching of Steel Parts and Tools in Water Salt Solutions of Optimal Concentration
J. ASTM Int.. February 2012, 9(2): 1–18.
doi: https://doi.org/10.1520/JAI104072
A Test Method for Monitoring Modulus Changes during Durability Tests on Building Joint Sealants
J. ASTM Int.. February 2012, 9(2): 1–8.
doi: https://doi.org/10.1520/JAI104090
Cracking Resistance and Impact Wear of Thin and Thick Hard Coatings Under Cyclic Loading
J. ASTM Int.. February 2012, 9(2): 1–11.
doi: https://doi.org/10.1520/JAI104108
Effect of Accuracy of Temperature Measurements on Determination of Heat Transfer Coefficient during Quenching in Liquid Media
J. ASTM Int.. February 2012, 9(2): 1–12.
doi: https://doi.org/10.1520/JAI104173
5083 Aluminum Alloy Welded Joints: Measurements of Mechanical Properties by DIC
J. ASTM Int.. February 2012, 9(2): 1–9.
doi: https://doi.org/10.1520/JAI104307
Critical Assessment of the Standard ASTM E 399
J. ASTM Int. (April 2005)
Effects of Contamination on Aerospace Hydraulic Component and System Performance
J. ASTM Int. (October 2008)
Mechanical Properties of ASR-Affected Concrete Containing Fine or Coarse Reactive Aggregates
J. ASTM Int. (March 2006)
