...A. Suriyawong; A. S. Dalkilic; S. Wongwises This paper is a continuation of the authors’ previous work on the nucleate pool boiling heat transfer of nanofluids [Suriyawong, A. and Wongwises, S., “Nucleate pool boiling heat transfer characteristics of TiO2-water nanofluids at very low concentrations...

...K. Babu; T. S. Prasanna Kumar This paper utilizes the experimental and numerical results obtained during quenching of stainless steel (SS) probes in carbon nanotube (CNT) nanofluids to arrive at an optimum CNT concentration and bath temperature for maximum quenching heat transfer rate...

...Rosa Lucia Simencio Otero Although heat transfer coefficient characterization of quench severity is not new, there continues to be a need for the rapid and relatively simple calculation of heat transfer coefficients from time-temperature cooling curve data files obtained via test methods...

...I.G. Shekriladze The review on boiling heat transfer addresses many critically important problems including the disregard of the pumping effect of growing bubbles (PEGB), the so-called “model of the theatre of director” (MTD), and the universal MTD-based correlation. In this review, with respect...

...Jian-Fu Zhao; Shi-Xin Wan A series of experimental studies on bubble dynamical behaviors and heat transfer in pool boiling on thin wires in different gravity conditions have been performed in the past years, including experiments in long-term microgravity aboard the 22nd Chinese recoverable...

...Wenhua Yu; David M. France; Jules L. Routbort Forced convective boiling heat transfer of water and ethylene glycol/water mixtures with volume concentration ratios of 40/60, 50/50, and 60/40 in a 2.98-mm inner-diameter circular tube has been investigated for both horizontal and vertical upward flows...

.... , Swinton , M. C. , and van Reenen   D. “ Laboratory Measurements and Benchmarking of an Advanced Hygrothermal Model ,” Proceeding of the 12th International Heat Transfer Conference , Grenoble, France, August 18–23, 2002 . Maref , W. , Lacasse , M. A. , Booth , D. , Nicholls , M...

..., building system, drying, envelope, heat transfer, mass transfer, modeling, moisture, wood product Introduction Simulation models can accommodate a variety of changing boundary conditions and result as well in much faster analysis, given the recent advances in computer technology that have permitted ready...

... experimental results, heat transfer analysis, and post-test microanalysis of quenched samples. These results are then used to show that heat transfer across the solid/liquid interface is the rate-limiting mechanism for melting and burning, limited by the interfacial surface area between the molten drop...

... Temperatures ,” J. ASTM Int.   1546-962X , Vol. 3 , 2006 , Paper ID JAI13539. 2009-10-07 - 2009-10-09 Twelfth International Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres Berlin, Germany heterogeneous burning melting heat transfer rate-limiting...

...: Measurements and Implications in Buildings Vancouver, Canada experimental testing radiant ceiling panel heat transfer moisture transfer porous membrane indoor relative humidity HVAC 18 07 2008 24 02 2009 30 03 2009 Journal of ASTM International, Vol. 6, No. 4 Paper ID...

...M. Pohanka; H. Bellerova; M. Raudensky An experimental technique for the measurements of heat transfer distribution at spray cooled surfaces is described. The measurements were done at moving surfaces up to a velocity of 12 m/s. The samples of different cross sections (flat, profile, rail, etc...

..., clothing, biophysics, heat transfer Introduction Interest in thermal manikins has been growing as sophisticated manikins are used in government, industrial, and academic research settings to evaluate the thermal properties of clothing, cooling garments, footwear, and handwear to determine the protective...

... to a change in the geometry of the molten ball, rather than higher temperatures. A one-dimensional, steady state heat transfer model was developed, correlating regression rate of the melting interface to surface area of the solid/liquid interface. Evidence is presented suggesting that (a) the solid/liquid...

... resistance thermal capacitance power losses heat transfer References Mellor , P. H. , Roberts , D. , and Turner , D. R. , “ Lumped Parameter Thermal Model for Electrical Machines of TEFC Design ,” IEE Proc. B , Vol. 138 , No. 5 , 1995 , pp. 205 - 218 . Kylander , G...

... with established destructive tests to indicate useful service life. The paper concludes that among the methods examined in this study, digital image analysis offers the most promise for providing an economical and effective technique to assess the condition of in-use garments. protective clothing heat transfer...