Aluminum autobody sheets produce appreciable amounts of slivers during trimming operations when trimmed with dies conventionally designed for steel sheets. The slivers can be carried through downstream processes and cause damage to the surface of formed parts resulting in costly manual repair. This paper reports a systematic experimental study at both the macro- and micro-scale of the sliver generation problem with relation to cutting angle, clearance, and blade sharpness. It is concluded that slivers can be reduced or even eliminated by modifying the current trimming tools designed for steel sheets. The most striking finding is that the conventional wisdom of 0-degree cutting conditions generate the largest amount of slivers for aluminum alloy sheets. With proper cutting angles, trimming aluminum autobody sheets can actually be more robust than that for steel sheets—the clearances can be less restrictive and tools may require much less frequent sharpening. The microscopic investigation traced the origins of slivers and revealed the mechanisms of sliver generation. The paper demonstrates that the integration of material microstructure and mechanics is very beneficial for solving a significant manufacturing problem and can greatly improve the process of shearing aluminum alloy autobody sheet.

1.
Daniel, D., Shahani, R., Baldo, R., and Hoffmann, J. L., 1999, “Development of 6xxx Aluminum Sheet for Autobody Outer Panels: Bake Hardening, Formability and Trimming Performance,” SAE Technical Paper Series, 1999-01-3195.
2.
Li, M., and Fata, G., 1999, “Sliver Reduction in Trimming Aluminum Autobody Sheet,” SAE Technical Paper Series, 1999-01-0661.
3.
Chang
,
T. M.
, and
Swift
,
H. W.
,
1950
, “
Shearing of Metal Bars
,”
J. Inst. Met.
,
78
, pp.
119
146
.
4.
Johnson, W., and Slater, R. A. C., 1967, “Survey of Slow and Fast Blanking of Metals at Ambient and High Temperatures,” Proc. Int. Conf. “Manufacturing Technology, CIRP-ASTME, pp. 825–851.
5.
Johnson
,
W.
,
Ghosh
,
S. K.
, and
Reid
,
S. R.
,
1980
, “
Piercing and Hole-Flanging of Sheet Metals: A Survey
,”
Memoires Scientifiques Revue Netallurgie
,
77
, pp.
585
606
.
6.
Noble
,
C. F.
, and
Oxley
,
P. L. B.
,
1964
, “
Crack Formation in Blanking and Piercing
,”
Int. J. Prod. Res.
,
2
,
265
274
.
7.
Atkins
,
A. G.
,
1980
, “
On Cropping and Related Process
,”
Int. J. Mech. Sci.
,
22
, pp.
215
231
.
8.
Dodd
,
B.
,
1983
, “
Shear Instabilities in Blanking and Related Process
,”
Met. Technol. (London)
,
10
, pp.
57
60
.
9.
Dood
,
B.
, and
Atkins
,
A. G.
,
1983
, “
Flow Localization in Shear Deformation of Void-Containing and Void-Free Solids
,”
Acta Metall.
,
31
, pp.
9
15
.
10.
Zhou
,
Q.
, and
Wierzbicki
,
T.
,
1996
, “
A Tension Zone Model of Blanking And Tearing of Ductile Metal Plate
,”
Int. J. Mech. Sci.
,
38
, pp.
303
324
.
11.
Kasuga
,
Y.
,
Tsutsumi
,
S.
, and
Mori
,
T.
,
1978
, “
On the Shearing Process of Ductile Metals
,”
Bull. JSME
,
21
, pp.
753
760
.
12.
Atkins
,
A. G.
,
1981
, “
Surface Produced by Guillotining
,”
Philos. Mag. A
,
43
, pp.
627
641
.
13.
Taupin
,
E.
,
Breitling
,
J.
,
Wu
,
W. T.
, and
Altan
,
T
,
1996
, “
Material Fracture and Burr Formation in Blanking Results of FEM Simulations and Comparison with Experiments
,”
J. Mater. Process. Technol.
,
59
, pp.
68
78
.
14.
Hobbs, R. M., and Duncan, J. L., 1979, “Cutting, Piercing, Blanking and Fine Blanking,” Sheet Metal Forming, Harvey, P. D., ed., Materials Engineering Institute, ASM.
15.
Lange, K., 1985, Handbook of Metal Forming, McGraw-Hill, New York.
16.
Semiatin, S. L., et al., 1988, Metals Handbook: Forming and Forging, Vol. 14, ASM, Metals Park, Ohio.
17.
Li
,
M.
,
2000
, “
An Experimental Investigation on Cut Surface and Burr in Trimming Aluminum Autobody Sheet
,”
Int. J. Mech. Sci.
,
42
, pp.
889
906
.
18.
Li, M., and Fata, G., 1998, “Trimmed Aluminum,” U.S. Patent 5,820,999.
19.
Li
,
M.
,
2000
, “
Micromechanisms of Deformation and Fracture in Shearing Aluminum Alloy Sheet
,”
Int. J. Mech. Sci.
,
42
, pp.
907
923
.
20.
McClintock
,
F. A.
,
1968
, “
A Criterion for Ductile Fracture by the Growth of Holes
,”
ASME J. Appl. Mech.
,
35
, pp.
363
371
.
21.
Rice
,
J. R.
, and
Tracey
,
D. M.
,
1969
, “
On The Ductile Enlargement of Voids in Triaxial Stress Fields
,”
J. Mech. Phys. Solids
,
17
, pp.
201
217
.
You do not currently have access to this content.