Topics: Bearings , Finite element methods , Rolling mills , Steady state , Stiffness , Stress , Strips , Transients (Dynamics) , Cold rolling , Modeling

Co-Kriging Method for Form Error Estimation Incorporating Condition Variable Measurements

Shichang Du, Lan Fei

J. Manuf. Sci. Eng. April 2016, 138(4): 041003. doi: https://doi.org/10.1115/1.4031550

Abstract

View articletitled, Co-Kriging Method for Form Error Estimation Incorporating Condition Variable Measurements

Open the PDF for in another window

Topics: Errors , Machining , Statistics , Interpolation

Rolling at Small Scales

Kim L. Nielsen, Christian F. Niordson, John W. Hutchinson

J. Manuf. Sci. Eng. April 2016, 138(4): 041004. doi: https://doi.org/10.1115/1.4031068

Abstract

View articletitled, Rolling at Small Scales

Open the PDF for in another window

Topics: Displacement , Friction , Hardening , Steady state , Stick-slip , Strain gradient , Torque , Stress , Traction , Deformation

Analysis of Cohesive Microsized Particle Packing Structure Using History-Dependent Contact Models

Raihan Tayeb, Xin Dou, Yijin Mao, Yuwen Zhang

J. Manuf. Sci. Eng. April 2016, 138(4): 041005. doi: https://doi.org/10.1115/1.4031246

Abstract

View articletitled, Analysis of Cohesive Microsized Particle Packing Structure Using History-Dependent Contact Models

Open the PDF for in another window

Topics: Cohesion , Packings (Cushioning) , Particulate matter , Packing (Shipments) , Porosity , Simulation

Determination of Motion Equation of Rivet Head During Shaft Riveting Assembly Process for Wheel Hub Bearing Units

Jie Qu, Guojie Zhang

J. Manuf. Sci. Eng. April 2016, 138(4): 041006. doi: https://doi.org/10.1115/1.4031588

Abstract

View articletitled, Determination of Motion Equation of Rivet Head During Shaft Riveting Assembly Process for Wheel Hub Bearing Units

Open the PDF for in another window

Topics: Equations of motion , Manufacturing , Riveting , Rivets , Wheels , Bearings , Displacement

Fabrication of Microfluidic Manifold by Precision Extrusion Deposition and Replica Molding for Cell-Laden Device

Jessica Snyder, Ae Rin Son, Qudus Hamid, Wei Sun

J. Manuf. Sci. Eng. April 2016, 138(4): 041007. doi: https://doi.org/10.1115/1.4031551

Abstract

View articletitled, Fabrication of Microfluidic Manifold by Precision Extrusion Deposition and Replica Molding for Cell-Laden Device

Open the PDF for in another window

Topics: Construction , Extruding , Flow (Dynamics) , Manifolds , Manufacturing , Microfluidics , Molding , Plasma desorption mass spectrometry , Printing , Bioprinting

Experimental Analysis and Microstructure Modeling of Friction Stir Extrusion of Magnesium Chips

Reza Abdi Behnagh, Ninggang Shen, Mohammad Ali Ansari, Morteza Narvan, Mohammad Kazem Besharati Givi, Hongtao Ding

J. Manuf. Sci. Eng. April 2016, 138(4): 041008. doi: https://doi.org/10.1115/1.4031281

Abstract

View articletitled, Experimental Analysis and Microstructure Modeling of Friction Stir Extrusion of Magnesium Chips

Open the PDF for in another window

Topics: Deformation , Extruding , Friction , Grain size , Heat , Magnesium (Metal) , Microhardness , Modeling , Temperature , Wire

Rotating Resistance of Belt Conveyor Idler Rolls

Craig A. Wheeler

J. Manuf. Sci. Eng. April 2016, 138(4): 041009. doi: https://doi.org/10.1115/1.4031552

Abstract

View articletitled, Rotating Resistance of Belt Conveyor Idler Rolls

Open the PDF for in another window

Topics: Bearings , Belts , Conveyor belts , Conveyor systems , Drag (Fluid dynamics) , Friction , Sealing (Process) , Stress , Temperature , Torque

Introduction to a Third-Generation Automobile Steel and Its Optimal Warm-Stamping Process

Ying Chang, Cunyu Wang, Kunmin Zhao, Han Dong, Jianwen Yan

J. Manuf. Sci. Eng. April 2016, 138(4): 041010. doi: https://doi.org/10.1115/1.4031636

Abstract

View articletitled, Introduction to a Third-Generation Automobile Steel and Its Optimal Warm-Stamping Process

Open the PDF for in another window

Topics: Automotive steel , Columns (Structural) , Elongation , Mechanical properties , Metal stamping , Steel , Temperature , Tensile strength , Vickers hardness testing

Technical Brief

Reducing Geometrical, Physical, and Chemical Constraints in Surface Integrity of High-Performance Stainless Steel Components by Surface Modification

M. K. Lei, X. P. Zhu, D. M. Guo

J. Manuf. Sci. Eng. April 2016, 138(4): 044501. doi: https://doi.org/10.1115/1.4031191

Abstract

View articletitled, Reducing Geometrical, Physical, and Chemical Constraints in Surface Integrity of High-Performance Stainless Steel Components by Surface Modification

Open the PDF for in another window

Topics: Stainless steel , Stress , Manufacturing , Atomic, molecular, and chemical characteristics , Thermomechanics

Determination of Force Parameters for Milling Simulations by Combining Optimization and Simulation Techniques

Dennis Freiburg, Rouven Hense, Petra Kersting, Dirk Biermann

J. Manuf. Sci. Eng. April 2016, 138(4): 044502. doi: https://doi.org/10.1115/1.4031336

Abstract

View articletitled, Determination of Force Parameters for Milling Simulations by Combining Optimization and Simulation Techniques

Open the PDF for in another window

Topics: Milling , Optimization , Simulation , Errors , Optimization algorithms , Cutting , Machining

Design Innovation Paper

Design, Fabrication, and Experimental Validation of a Warm Hydroforming Test System

Mevlüt Türköz, Hüseyin Selçuk Halkacı, Mehmet Halkacı, Murat Dilmeç, Semih Avcı, Muammer Koç

J. Manuf. Sci. Eng. April 2016, 138(4): 045001. doi: https://doi.org/10.1115/1.4031498

Abstract

View articletitled, Design, Fabrication, and Experimental Validation of a Warm Hydroforming Test System

Open the PDF for in another window

Topics: Blanks , Cooling , Design , Heating , Insulation , Sealing (Process) , Temperature , Testing performance , Fluid pressure , Heating and cooling

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Effect of Warpage Pattern of Printed Circuit Board on Solder Paste Volume in the Stencil Printing Process

J. Manuf. Sci. Eng (July 2025)

Experimental Study on Force and Surface Morphology of Additive Manufacturing FeCoNiCrAl_0.5 High Entropy Alloy

J. Manuf. Sci. Eng (July 2025)

2024 Associate Editors

J. Manuf. Sci. Eng

Effect of Laser Energy Density on Temperature Field, Forming Quality, and Performance of LPBF-Fabricated 1 Nickel-Based Superalloy Composites

J. Manuf. Sci. Eng

Characterizing Shunting Effects on Nugget Quality and Joint Strength in Sequential Spot Welds for Automotive Applications

J. Manuf. Sci. Eng

Research Papers

Estimation of Cutter Deflection Based on Study of Cutting Force and Static Flexibility

Dynamic Analysis of Cold-Rolling Process Using the Finite-Element Method

Co-Kriging Method for Form Error Estimation Incorporating Condition Variable Measurements

Rolling at Small Scales

Analysis of Cohesive Microsized Particle Packing Structure Using History-Dependent Contact Models

Determination of Motion Equation of Rivet Head During Shaft Riveting Assembly Process for Wheel Hub Bearing Units

Fabrication of Microfluidic Manifold by Precision Extrusion Deposition and Replica Molding for Cell-Laden Device

Experimental Analysis and Microstructure Modeling of Friction Stir Extrusion of Magnesium Chips

Rotating Resistance of Belt Conveyor Idler Rolls

Introduction to a Third-Generation Automobile Steel and Its Optimal Warm-Stamping Process

Technical Brief

Reducing Geometrical, Physical, and Chemical Constraints in Surface Integrity of High-Performance Stainless Steel Components by Surface Modification

Determination of Force Parameters for Milling Simulations by Combining Optimization and Simulation Techniques

Design Innovation Paper

Design, Fabrication, and Experimental Validation of a Warm Hydroforming Test System

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Brief

Design Innovation Paper

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only