Skip Nav Destination
Issues
2016
ISSN 2379-1365
EISSN 2165-3992
In this Issue
Research Papers
Influence of Boronizing Treatment on Fe–Mn–Al–Si–C Steel
Matls. Perf. Charact.. July 2016, 5(1): 1–6.
doi: https://doi.org/10.1520/MPC20150036
Modeling Effective Thermal Conductivity of Randomly Distributed Loads of Mono-Sized Parts of Arbitrary Geometry
Matls. Perf. Charact.. July 2016, 5(1): 7–22.
doi: https://doi.org/10.1520/MPC20150031
Evaluation of Rolling Contact Fatigue Using X-Ray Diffraction Ring
Matls. Perf. Charact.. July 2016, 5(1): 23–37.
doi: https://doi.org/10.1520/MPC20150027
Heat Treatment of Precipitation-Hardening Stainless Steels Alloyed With Niobium
Matls. Perf. Charact.. July 2016, 5(1): 38–46.
doi: https://doi.org/10.1520/MPC20150039
Influence of Pack Boriding on the Wear and Corrosion Resistance of AISI H13 Steel
Matls. Perf. Charact.. July 2016, 5(1): 47–53.
doi: https://doi.org/10.1520/MPC20150041
Electric Erosion Induced Microstructure and Mechanical Properties in Spark Plasma Sintered Al-4.5 wt. % Cu Alloy
Matls. Perf. Charact.. July 2016, 5(1): 54–65.
doi: https://doi.org/10.1520/MPC20150011
Aging Behavior of Pb Alloy–45 Vol. % Fly Ash Microballoon Composites
Matls. Perf. Charact.. July 2016, 5(1): 66–77.
doi: https://doi.org/10.1520/MPC20150033
Explicit Finite Element Modelling as a Development Tool for New Ultrasound Testing Methodologies for Detection and Characterization of Porosity and Defects in Composites
Matls. Perf. Charact.. July 2016, 5(1): 78–98.
doi: https://doi.org/10.1520/MPC20150047
Influences on the Carbon Preform Porosity and Microstructure Evolution of MiCaSiC Ceramics Manufactured by the Liquid Silicon Infiltration (LSI) Process
Matls. Perf. Charact.. July 2016, 5(1): 99–115.
doi: https://doi.org/10.1520/MPC20150045
Effects of Hollow Fly-Ash Particles on the Properties of Magnesium Matrix Syntactic Foams: A Review
Matls. Perf. Charact.. July 2016, 5(1): 116–131.
doi: https://doi.org/10.1520/MPC20150060
Fatigue Life Prediction of a Unidirectional Carbon Fiber Composite Under Off-Axis Spectrum Loads Using 3D Constant Life Diagram
Matls. Perf. Charact.. July 2016, 5(1): 132–147.
doi: https://doi.org/10.1520/MPC20150048
Quasi-Static, Cyclic Fatigue and Fracture Behavior of Alloy Steel for Structural Applications: Influence of Orientation
Matls. Perf. Charact.. July 2016, 5(1): 148–163.
doi: https://doi.org/10.1520/MPC20150030
In-Situ Characterization of Isotropic and Transversely Isotropic Elastic Properties Using Ultrasonic Wave Velocities
Matls. Perf. Charact.. July 2016, 5(1): 164–188.
doi: https://doi.org/10.1520/MPC20150021
Experimental Investigation of the Effect of Polyisobutilene Additives to Mineral Oil on Cooling Characteristics
Matls. Perf. Charact.. July 2016, 5(1): 189–201.
doi: https://doi.org/10.1520/MPC20150072
Enhanced Hardenability and Tempering Resistance of AISI 4130 Steel by Ni Addition
Matls. Perf. Charact.. July 2016, 5(1): 202–208.
doi: https://doi.org/10.1520/MPC20150046
Measurement and Recording of Quenching Intensity in Workshop Conditions Based on Temperature Gradients
Matls. Perf. Charact.. July 2016, 5(1): 209–226.
doi: https://doi.org/10.1520/MPC20160007
Comparative Impact Behavior of High-C Steel After Conventional Quenching, Tempering, and Austempering
Matls. Perf. Charact.. July 2016, 5(1): 227–238.
doi: https://doi.org/10.1520/MPC20150042
Effect of Heat Treatment and Surface Condition on Inter-Granular Corrosion of Alloy 800
Matls. Perf. Charact.. July 2016, 5(1): 239–252.
doi: https://doi.org/10.1520/MPC20160003
The Effect of Thermal Treatment on Microstructure and Corrosion of Nickel Base Alloy 690 (UNS N0 6690)
Matls. Perf. Charact.. July 2016, 5(1): 253–271.
doi: https://doi.org/10.1520/MPC20160046
Effect of Cenosphere Size and Volume Fraction on the Microstructure and Deformation Behavior of Ti-Cenosphere Syntactic Foam Made Through Powder Metallurgy Route
Matls. Perf. Charact.. July 2016, 5(1): 266–288.
doi: https://doi.org/10.1520/MPC20160021
Development of a Slip Hazard: Partially Wetted Floors and Film Formation
Matls. Perf. Charact.. July 2016, 5(1): 272–287.
doi: https://doi.org/10.1520/MPC20160004
Austempered Ductile Iron (ADI): A Review
Matls. Perf. Charact.. July 2016, 5(1): 289–311.
doi: https://doi.org/10.1520/MPC20160053
Study of Erosion Performance and Characterization of Ebonite Reinforced With Carbon Fibers
Matls. Perf. Charact.. July 2016, 5(1): 312–329.
doi: https://doi.org/10.1520/MPC20160091
The Effect of Production Process Parameters on the Tensile Strength of Squeeze Cast Al2O3+SiC/Al6061 Hybrid Composites
Matls. Perf. Charact.. July 2016, 5(1): 330–346.
doi: https://doi.org/10.1520/MPC20160054
Email alerts
RSS Feeds
Editorial: Special Issue on Fatigue and Fracture Mechanics
Matls. Perf. Charact. (December 2024)
Effect of Printing Parameters and Heat Treatments on Microstructure Development of LPBF Manufactured Inconel 718 Alloy
Matls. Perf. Charact. (October 2024)
Grain Structure and Tensile Properties of As-Cast and Aged Pb–1.1%Sn–0.05%Ca
Matls. Perf. Charact. (October 2024)
Understanding Fatigue Damage Progression in Stainless Steel 304L through Static and Cyclic Indentation Studies
Matls. Perf. Charact. (December 2024)
Characterization of Fatigue Crack Growth in Austenitic Stainless-Steel Alloy 709 at Elevated Temperatures using a Strip-Yield Model
Matls. Perf. Charact. (December 2024)