... the transformation of the phase into the phase. Keywords microstructure, X-ray diffraction, hardness, scanning electron microscopy, Inconel Copyright © 2022 by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 ASTM International is not responsible, as a body...

...-quenched specimens. Intergranular and pitting types of corrosion have been observed in the scanning electron microscopy images of corroded specimens. 26 10 2020 10 02 2021 21 04 2021 powder metallurgy plain carbon steel heat treatment corrosion rate microstructure scanning...

... indicates its potentiality to be used for composite manufacturing. 29 03 2019 02 11 2020 22 12 2020 polyethylene terephthalate char polyester tensile strength flexural strength impact strength scanning electron microscopy References Grigore   M. E. , “ Methods...

... Verhoeven   J. D. , Fundamentals of Physical Metallurgy ( New York : John Wiley & Sons , 1975 ). intergranular corrosion dissimilar alloys heat-affected zone scanning electron microscopy electron backscattering diffraction microhardness 24 08 2018 10 12 2018 20 05...

... carbon nanotubes, mechanical properties, scanning electron microscopy, cement-based composites Introduction Cement is the most widely used construction material in the world. It exhibits good fineness, soundness, setting time, strength, and specific gravity, but it has poor tensile and flexural...

... Bi1.5 xCaxSb1.5CuO7 has been prepared by conventional ceramic solid state reaction with 0 x 0.4. The samples were characterized by X-ray powder diffraction (XRPD), scanning electron microscopy, and electrical conductivity measurements. The pyrochlore single phase formation was confirmed for all...

..., while there was the appearance of thick cracked layer as the temperature and the sulfate concentration increased. 06 02 2018 17 09 2018 02 11 2018 carbon steel polarization scanning electron microscopy weight loss anodic dissolution sodium sulfates References Ikpi...

... 2017 21 05 2018 12 07 2018 polyether composite material tribological properties friction surface optical microscopy scanning electron microscopy X-ray local microanalysis References Pokhmurs’kyi , V. I. , Rats’ka , N. B. , Vasyliv , K. B. , and Vynar , V...

.... Scanning Electron Microscopy (SEM) fractography of the tensile fractured surfaces reveal the brittle mode of fracture irrespective of the mode of welding currents, which are being used for joining the specimens. Optical microscopy, Energy Dispersive Spectroscopy (EDS), and X-ray Diffraction (XRD) analyses...

... were characterized using analytical transmission electron microscopy (TEM) and scanning electron microscopy (SEM) techniques. Micro-analyses confirmed the presence of Cr-enriched α '' and Cr-depleted α ' spinodal structures in the ferrite after 5 h of aging at 475°C. Long-term aging for 255 h resulted...

... evaluated for mechanical properties at RT, 77 K, and 20 K. The failure of the tensile specimens was predominantly on the AA2219 side of the weld bead at all test temperatures down to 20 K. Microstructural analysis was carried out by optical and scanning electron microscopy. Based on extensive analysis...

... of failure. Fracture surface observations by scanning electron microscopy revealed features of material flow and softening at many locations indicative of exposure of fracture surface to high temperature after failure. Further, striation marks were noticed on the fracture surface indicative of fatigue. Very...