In this study, a hierarchical multiscale homogenization procedure aimed at predicting the effective mechanical properties of silica/epoxy nanocomposites is presented. First, the mechanical properties of the amorphous silica nanoparticles are investigated by means of molecular dynamics (MD) simulations. At this stage, the MD modeling of three-axial tensile loading of amorphous silica is carried out to estimate the elastic properties. Second, the conventional twp phase homogenization techniques such as finite elements (FE), Mori-Tanaka (M-T), Voigt and Reuss methods are implemented to evaluate the overall mechanical properties of the silica/epoxy nanocomposite at different temperatures and at constant weight ratio of 5%. At this point, the mechanical properties of silica obtained in the first stage are used as the inputs of the reinforcing phase. Comparison of the FE and M-T results with the experimental results in a wide range of temperatures reveals fine agreement; however, the FE results are in better agreement with the experiments than those obtained by M-T approach. Additionally, the results predicted by FE and M-T methods are closer to the lower bound (Reuss), which is due to lowest surface to volume ratio of spherical particles.
Issue Section:
Bridging Microstructure, Properties, and Processing of Polymer-Based Advanced Materials
References
1.
Piggott
, M.
, 2002, Load Bearing Fibre Composites
, 2nd ed., Kluwer Academic Publisher
, Dordrecht
.2.
Desai
, A. V.
, and Haque
, M. A.
, 2005, “Mechanics of the Interface for Carbon Nanotube–Polymer Composites
,” Thin-Walled Struct.
, 43
, pp. 1787
–1803
.3.
Blackman
, B. R. K.
, Kinloch
, A. J.
, Sohn Lee
, J.
, Taylor
, A. C.
, Agarwal
, R.
, Schueneman
, G.
, and Sprenger
, S.
, 2007, “The Fracture and Fatigue Behaviour of Nano-Modified Epoxy Polymers
,” J. Mater. Sci.
, 42
(16
), pp. 7049
–7051
.4.
Bugnicourt
, E.
, Galy
, J.
, Gérard
, J. F.
, Boué
, F.
, and Barthel
, H.
, 2007, “Effect of Sub-Micron Silica Fillers on the Mechanical Performances of Epoxy-Based Composites
,” Polymer
, 48
(6
), pp. 1596
–1605
.5.
Laachachi
, A.
, Cochez
, M.
, Ferriol
, M.
, Lopez-Cuesta
, J. M.
, and Leroy
, E.
, 2005, “Influence of TiO2 and Fe2O3 Fillers on the Thermal Properties of Poly(Methyl Methacrylate) (PMMA)
,” Mater. Lett.
, 59
(1
), pp. 36
–39
.6.
Zhang
, H.
, Zhang
, Z.
, Friedrich
, K.
, and Eger
, C.
, 2006, “Property Improvements of In Situ Epoxy Nanocomposites With Reduced Interparticle Distance at High Nanosilica Content
,” Acta Mater.
, 54
(7
), pp. 1833
–1842
.7.
Zhang
, Y.
, Bai
, S.
, Li
, X.
, and Zhang
, Z.
, 2009, “Effect of PPO-g-MA on Structures and Properties of PPO/PA6/Short Glass Fiber Composites
,” J. Polym. Sci., Part B: Polym. Phys.
, 47
(22
), pp. 2188
–2197
.8.
Kang
, S.
, Hong
, S. I.
, Choe
, C. R.
, Park
, M.
, Rim
, S.
, and Kim
, J.
, 2001, “Preparation and Characterization of Epoxy Composites Filled With Functionalized Nanosilica Particles Obtained via Sol–Gel Process
,” Polymer
, 42
(3
), pp. 879
–887
.9.
Zhang
, H.
, Tang
, L. C.
, Zhang
, Z.
, Friedrich
, K.
, and Sprenger
, S.
, 2008, “Fracture Behaviours of In Situ Silica Nanoparticle-Filled Epoxy at Different Temperature
,” Polymer
, 49
(17
), pp. 3816
–3825
.10.
Hbaieb
, K.
, Wang
, Q. X.
, Chia
, Y. H. J.
, and Cotterell
, B.
, 2007, “Modelling Stiffness of Polymer/Clay Nanocomposites
,” Polymer
, 48
(3
), pp. 901
–909
.11.
Torquato
, S.
, 2002, Random Heterogeneous Materials: Microstructure and Macroscopic Properties
, Springer
, New York
.12.
Baniassadi
, M.
, Garmestani
, H.
, Li
, D. S.
, Ahzi
, S.
, Khaleel
, M.
, and Sun
, X.
, 2011, “Three-Phase Solid Oxide Fuel Cell Anode Microstructure Realization Using Two-Point Correlation Functions
,” Acta Mater.
, 59
(1
), pp. 30
–43
.13.
Li
, D. S.
, Baniassadi
, M.
, Garmestani
, H.
, Ahzi
, S.
, Reda-Taha
, M. M.
, and Ruch
, D.
, 2010, “3D Reconstruction of Carbon Nanotube Composite Microstructure Using Correlation Functions
,” J. Comput. Theor. Nanosci.
, 7
(8
), pp. 1462
–1468
.14.
Haile
, J. M.
1992, Molecular Dynamic Simulation
, John Wiley & Sons
, New York
.15.
Mortazavi
, B.
, Afaghi Khatibi
, A.
, and Politis
, C.
, 2009, “Molecular Dynamics Investigation of Loading Rate Effects on Mechanical-Failure Behaviour of FCC Metals
,” J. Comput. Theor. Nanosci.
, 6
(3
), pp. 644
–652
.16.
Khatibi
, A. A.
, and Mortazavi
, B.
, 2008, “A study on the Nanoindentation Behaviour of Single Crystal Silicon Using Hybrid MD-FE Method
,” Adv Mater. Res.
, 32
, pp. 259
–262
.17.
Aly
, M. F.
, Ng
, E.
, Veldhuis
, S. C.
, and Elbestawi
, M. A.
, 2006, “Prediction of Cutting Forces in the Micro-Machining of Silicon Using a ‘hybrid molecular dynamic-finite element analysis’ force model
,” Int. J. Mach. Tools Manuf.
, 46
(14
), pp. 1727
–1739
.18.
Sperandio
, C.
, Laachachi
, A.
, Ruch
, D.
, Poilâne
, C.
, Bourson
, P.
, Salvestrini
, J. P.
, and Ahzi
, S.
, 2010, “Use of Functionalized Nanosilica to Improve Thermo-Mechanical Properties of Epoxy Adhesive Joint Bonding Aluminium Substrates
,” J. Nanosci. Nanotechnol.
, 10
(4
), pp. 2844
–9
.19.
Beest
, B. W. H.
, Kramer
, G. J.
, and Santen
, R. A.
, 1990, “Force Fields for Silicas and Aluminophosphates Based on Ab Initio Calculations
,” Phys. Rev. Lett.
, 64
(16
), pp. 1955
–1958
.20.
Zhang
, C.
, Duan
, Z.
, and Li
, M.
, 2010, “Interstitial Voids in Silica Melts and Implication for Argon Solubility Under High Pressures
,” Geochim. Cosmochim. Acta
, 74
(14
), pp. 4140
–4149
.21.
Malavasi
, G.
, Menziani
, M. C.
, Pedone
, A.
, and Segre
, U.
, 2006, “Void Size Distribution in MD-Modelled Silica Glass Structures
,” J. Non-Cryst. Solids
, 352
(3
), pp. 285
–296
.22.
Muralidharan
, K.
, Simmons
, J. H.
, Deymier
, P. A.
, and Runge
, K.
, 2005, “Molecular Dynamics Studies of Brittle Fracture in Vitreous Silica: Review and Recent Progress
,” J, Non-Cryst, Solids
, 351
(18
), pp. 1532
–1542
.23.
Mori
, T.
, and Tanaka
, K.
, 1973, “Average Stress in Matrix and Average Elastic Energy of Materials With Misfitting Inclusions
,” Acta Metall.
21
(5
), pp. 571
–574
.24.
Benveniste
, Y.
, 1987, “A New Approach to the Application of Mori-Tanaka’s Theory in Composite Materials
,” Mech. Mater.
, 6
(2
), pp. 147
–157
.25.
Odegard
, G. M.
, Clancy
, T. C.
, and Gates
, T. S.
, 2005, “Modeling of the Mechanical Properties of Nanoparticle/Polymer Composites
,” Polymer
, 46
(2
), pp. 53
–562
.26.
Montazeri
, A.
, and Naghdabadi
, R.
, 2010, “Investigation of the Interphase Effects on the Mechanical Behavior of Carbon Nanotube Polymer Composites by Multiscale Modeling
,” J. Appl. Polym. Sci.
117
(1
), pp. 361
–367
.Copyright © 2012
by American Society of Mechanical Engineers
You do not currently have access to this content.
