Skip Nav Destination
Issues
April 2011
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Research Papers
Use of a Continuum Damage Model Based on Energy Equivalence to Predict the Response of a Single-Crystal Superalloy
J. Eng. Mater. Technol. April 2011, 133(2): 021001.
doi: https://doi.org/10.1115/1.4000666
Topics:
Crystals
,
Damage
,
Hardening
,
Superalloys
,
Viscoplasticity
,
Stress
,
Plates (structures)
,
Deformation
,
Geometry
,
Constitutive equations
Influence of Dissipated Energy on Shear Band Spacing in HY-100 Steel
J. Eng. Mater. Technol. April 2011, 133(2): 021002.
doi: https://doi.org/10.1115/1.4001592
Topics:
Shear (Mechanics)
,
Steel
,
Work hardening
Finite Element Analysis of Welding Processes by Way of Hypoelasticity-Based Formulation
J. Eng. Mater. Technol. April 2011, 133(2): 021003.
doi: https://doi.org/10.1115/1.4003099
Topics:
Phase transitions
,
Plasticity
,
Stress
,
Welding
,
Temperature
,
Finite element analysis
,
Cooling
,
Deformation
Study on Machinabilty of Ceramic Composite in EDM Using Response Surface Methodology
J. Eng. Mater. Technol. April 2011, 133(2): 021004.
doi: https://doi.org/10.1115/1.4003100
Effect of Cyclic Strain on the Mechanical Behavior of a Thermoplastic Polyurethane
J. Eng. Mater. Technol. April 2011, 133(2): 021005.
doi: https://doi.org/10.1115/1.4003101
Topics:
Stress
,
Temperature
,
Urethane elastomers
,
Thermal analysis
,
Polymers
Microstructure and Properties of the Composites: Hydroxyapatite With Addition of Zirconia Phase
J. Eng. Mater. Technol. April 2011, 133(2): 021006.
doi: https://doi.org/10.1115/1.4003104
Topics:
Composite materials
,
Porosity
,
Sinter (Metallurgy)
,
Ceramics
,
Sintering
,
Bone
Study of Machining-Induced Microstructure Variations of Nanostructured/Ultrafine-Grained Copper Using XRD
J. Eng. Mater. Technol. April 2011, 133(2): 021007.
doi: https://doi.org/10.1115/1.4003105
Topics:
Copper
,
Dislocation density
,
Grain size
,
Machining
,
Dislocations
Modeling of Strain-Stress Relationship for Carbon Steel Deformed at Temperature Exceeding Hot Rolling Range
J. Eng. Mater. Technol. April 2011, 133(2): 021008.
doi: https://doi.org/10.1115/1.4003106
Topics:
Deformation
,
Hot rolling
,
Steel
,
Stress
,
Temperature
,
Testing
,
Modeling
,
Compression
,
Yield stress
,
Carbon steel
Processing of Small Scale Nitinol Billets by Induction Heated Nonconventional Isothermal Extrusion (IHNCIE)
J. Eng. Mater. Technol. April 2011, 133(2): 021009.
doi: https://doi.org/10.1115/1.4003108
Topics:
Extruding
,
Nickel titanium alloys
,
Wire
,
Temperature
,
Electromagnetic induction
Uniaxial Strain and Stress-Controlled Cyclic Responses of Ultrahigh Molecular Weight Polyethylene: Experiments and Model Simulations
J. Eng. Mater. Technol. April 2011, 133(2): 021010.
doi: https://doi.org/10.1115/1.4003109
Topics:
Simulation
,
Stress
,
Molecular weight
,
Viscoplasticity
,
Cycles
,
Polymers
The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments
J. Eng. Mater. Technol. April 2011, 133(2): 021011.
doi: https://doi.org/10.1115/1.4003112
Topics:
Creep
,
Failure
,
Metals
,
Welded joints
,
Testing
,
Stress
,
Steel
,
Heat
,
Fracture (Process)
Ambient Temperature Creep of Type 304 Stainless Steel
J. Eng. Mater. Technol. April 2011, 133(2): 021012.
doi: https://doi.org/10.1115/1.4003110
Topics:
Creep
,
Stainless steel
,
Temperature
,
Yield stress
,
Plasticity
,
Work hardening
,
Stress
Characterization of the Creep Deformation and Rupture Behavior of DS GTD-111 Using the Kachanov–Rabotnov Constitutive Model
J. Eng. Mater. Technol. April 2011, 133(2): 021013.
doi: https://doi.org/10.1115/1.4003111
Topics:
Creep
,
Damage
,
Rupture
,
Temperature
,
Stress
,
Optimization
Effect of Material Physical Properties on Residual Stress Measurement by EDM Hole-Drilling Method
J. Eng. Mater. Technol. April 2011, 133(2): 021014.
doi: https://doi.org/10.1115/1.4000219
Topics:
Calibration
,
Drilling
,
Electrical discharge machining
,
Machining
,
Strain gages
,
Stress
,
Thermal conductivity
,
Carbon
Tensile and Fracture Characterization of PETI-5 and IM7/PETI-5 Graphite/Epoxy Composites Under Quasi-Static and Dynamic Loading Conditions
J. Eng. Mater. Technol. April 2011, 133(2): 021015.
doi: https://doi.org/10.1115/1.4003487
Topics:
Composite materials
,
Fracture (Materials)
,
Fracture (Process)
,
Stress
,
Graphite
,
Epoxy resins
Fatigue Behavior and Damage Assessment of Stainless Steel/Aluminum Composites
J. Eng. Mater. Technol. April 2011, 133(2): 021016.
doi: https://doi.org/10.1115/1.4003490
Topics:
Aluminum
,
Composite materials
,
Diffusion bonding (Metals)
,
Fatigue
,
Fatigue cracks
,
Fatigue testing
,
Fibers
,
Fracture (Materials)
,
Stainless steel
,
Stress
Model for the Effect of Fiber Bridging on the Fracture Resistance of Reinforced-Carbon-Carbon
J. Eng. Mater. Technol. April 2011, 133(2): 021017.
doi: https://doi.org/10.1115/1.4003344
Topics:
Fibers
,
Fracture (Materials)
,
Stress
,
Fracture toughness
,
Displacement
,
Fracture (Process)
Improvement of the Fatigue Behavior of Stainless Steel Substrates by Low Pressure Fluidized Bed Peening (FBP)
J. Eng. Mater. Technol. April 2011, 133(2): 021018.
doi: https://doi.org/10.1115/1.4003486
Topics:
Fatigue
,
Fatigue life
,
Fluidized beds
,
Shot peening
,
Stainless steel
,
Stress
,
Pressure
Mechanical Behavior of a Rephosphorized Steel for Car Body Applications: Effects of Temperature, Strain Rate, and Pretreatment
J. Eng. Mater. Technol. April 2011, 133(2): 021019.
doi: https://doi.org/10.1115/1.4003491
Topics:
Deformation
,
Steel
,
Stress
,
Temperature
,
Elongation
,
Mechanical behavior
,
Work hardening
,
Flow (Dynamics)
,
Temperature effects
Hole-Within-a-Hole Method for Determining Residual Stresses
J. Eng. Mater. Technol. April 2011, 133(2): 021020.
doi: https://doi.org/10.1115/1.4003496
Topics:
Drilling
,
Stress
,
Residual stresses
,
Finite element analysis
A Simple Transversely Isotropic Hyperelastic Constitutive Model Suitable for Finite Element Analysis of Fiber Reinforced Elastomers
J. Eng. Mater. Technol. April 2011, 133(2): 021021.
doi: https://doi.org/10.1115/1.4003517
Topics:
Compression
,
Deformation
,
Elastomers
,
Fibers
,
Finite element analysis
,
Shear (Mechanics)
,
Stress
,
Tension
,
Anisotropy
Fatigue Life Prediction of Different Fiber-Reinforced Composites Using Polynomial Classifiers
J. Eng. Mater. Technol. April 2011, 133(2): 021022.
doi: https://doi.org/10.1115/1.4003566
Topics:
Fatigue
,
Fatigue life
,
Polynomials
,
Fiber reinforced composites
Extrapolation Techniques for Very Low Cycle Fatigue Behavior of a Ni-base Superalloy
J. Eng. Mater. Technol. April 2011, 133(2): 021023.
doi: https://doi.org/10.1115/1.4003602
Topics:
Fatigue
,
High temperature
,
Low cycle fatigue
,
Stress
,
Superalloys
,
Temperature
,
Gas turbines
,
Tensile strength
,
Cycles
,
Alloys
Microplane Model for Fracturing Damage of Triaxially Braided Fiber-Polymer Composites
J. Eng. Mater. Technol. April 2011, 133(2): 021024.
doi: https://doi.org/10.1115/1.4003102
Topics:
Composite materials
,
Damage
,
Fracture (Materials)
,
Fracture (Process)
,
Size effect
,
Stress
,
Fibers
,
Simulation
,
Finite element analysis
,
Polymers
Time and Temperature Dependent Recovery of Epoxy-Based Shape Memory Polymers
J. Eng. Mater. Technol. April 2011, 133(2): 021025.
doi: https://doi.org/10.1115/1.4003103
Topics:
Cycles
,
Epoxy adhesives
,
Epoxy resins
,
Shape memory polymers
,
Temperature
,
Heating
,
Deformation
High Strain Rate Tensile Behavior of Aluminum Alloy 7075 T651 and IS 2062 Mild Steel
J. Eng. Mater. Technol. April 2011, 133(2): 021026.
doi: https://doi.org/10.1115/1.4003113
Topics:
Aluminum alloys
,
Steel
,
Yield strength
,
Stress
,
Uncertainty analysis
Technical Briefs
Characterization of Rapidly Consolidated Titanium Diboride
J. Eng. Mater. Technol. April 2011, 133(2): 024501.
doi: https://doi.org/10.1115/1.4003599
Email alerts
RSS Feeds
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components
J. Eng. Mater. Technol (April 2025)