Topics: Alloys , Casting , Compression , Deformation , Failure mechanisms , Magnesium (Metal) , Stress , Temperature , Magnesium alloys , Flow (Dynamics)

Strengthening Behavior and Tension–Compression Strength–Asymmetry in Nanocrystalline Metal–Ceramic Composites

A. M. Dongare, B. LaMattina, A. M. Rajendran

J. Eng. Mater. Technol. October 2012, 134(4): 041003. doi: https://doi.org/10.1115/1.4006678

Abstract

View articletitled, Strengthening Behavior and Tension–Compression Strength–Asymmetry in Nanocrystalline Metal–Ceramic Composites

Open the PDF for in another window

Topics: Atoms , Ceramic composites , Deformation , Metals , Tension , Compressive strength , Composite materials , Ceramics , Nanocomposites , Molecular dynamics simulation

A Damage Model for Adhesively Bonded Single-Lap Thick Composite Joints

Sayed A. Nassar, Jianghui Mao, Xianjie Yang, Douglas Templeton

J. Eng. Mater. Technol. October 2012, 134(4): 041004. doi: https://doi.org/10.1115/1.4006821

Abstract

View articletitled, A Damage Model for Adhesively Bonded Single-Lap Thick Composite Joints

Open the PDF for in another window

Topics: Adhesives , Composite materials , Damage , Modeling , Stress

Nonlinear Stress–Strain Characterization of Cast Iron Used to Manufacture Pipes for Water Supply

Balvant Rajani

J. Eng. Mater. Technol. October 2012, 134(4): 041005. doi: https://doi.org/10.1115/1.4007213

Abstract

View articletitled, Nonlinear Stress–Strain Characterization of Cast Iron Used to Manufacture Pipes for Water Supply

Open the PDF for in another window

Topics: Cast iron , Pipes , Stress , Failure , Constitutive equations

Simulation of Material Flow and Heat Evolution in Friction Stir Processing Incorporating Melting

H. W. Nassar, M. K. Khraisheh

J. Eng. Mater. Technol. October 2012, 134(4): 041006. doi: https://doi.org/10.1115/1.4006918

Abstract

View articletitled, Simulation of Material Flow and Heat Evolution in Friction Stir Processing Incorporating Melting

Open the PDF for in another window

Topics: Flow (Dynamics) , Friction , Heat , Melting , Temperature

An Internal State Variable Constitutive Model for Deformation of Austenitic Stainless Steels

Paul S. Follansbee

J. Eng. Mater. Technol. October 2012, 134(4): 041007. doi: https://doi.org/10.1115/1.4006822

Abstract

View articletitled, An Internal State Variable Constitutive Model for Deformation of Austenitic Stainless Steels

Open the PDF for in another window

Topics: Deformation , Nitrogen , Stainless steel , Stress , Temperature , Yield stress , Constitutive equations , Grain size , Alloys , Stress-strain curves

Comparison Between Two Experimental Procedures for Cyclic Plastic Characterization of High Strength Steel Sheets

G. B. Broggiato, F. Campana, L. Cortese, E. Mancini

J. Eng. Mater. Technol. October 2012, 134(4): 041008. doi: https://doi.org/10.1115/1.4006919

Abstract

View articletitled, Comparison Between Two Experimental Procedures for Cyclic Plastic Characterization of High Strength Steel Sheets

Open the PDF for in another window

Topics: Calibration , Compression , High strength steel , Kinematics , Tension , Stress , Finite element analysis , Hardening , Displacement

Effect of KIII on Fatigue Crack Growth Behavior

Masanori Kikuchi, Yoshitaka Wada, Chikako Ohdama

J. Eng. Mater. Technol. October 2012, 134(4): 041009. doi: https://doi.org/10.1115/1.4006978

Abstract

View articletitled, Effect of KIII on Fatigue Crack Growth Behavior

Open the PDF for in another window

Topics: Fatigue cracks , Finite element methods , Fracture (Materials) , Surface cracks , Simulation , Stress

Design of Radiation Tolerant Nanostructured Metallic Multilayers

X. Zhang, E. G. Fu, Nan Li, A. Misra, Y.-Q. Wang, L. Shao, H. Wang

J. Eng. Mater. Technol. October 2012, 134(4): 041010. doi: https://doi.org/10.1115/1.4006979

Abstract

View articletitled, Design of Radiation Tolerant Nanostructured Metallic Multilayers

Open the PDF for in another window

Topics: Bubbles , Hardening , Radiation (Physics) , Density , Radiation damage , Irradiation (Radiation exposure) , Design

Study of Ductile-to-Brittle Transition in Single Grit Diamond Scribing of Silicon: Application to Wire Sawing of Silicon Wafers

Hao Wu, Shreyes N. Melkote

J. Eng. Mater. Technol. October 2012, 134(4): 041011. doi: https://doi.org/10.1115/1.4006177

Abstract

View articletitled, Study of Ductile-to-Brittle Transition in Single Grit Diamond Scribing of Silicon: Application to Wire Sawing of Silicon Wafers

Open the PDF for in another window

Topics: Brittleness , Cutting , Diamonds , Fracture (Materials) , Friction , Sawing , Shapes , Silicon , Stress , Wire

Influence of Fabrication and Interference-Fit Techniques on Tensile and Fatigue Properties of Pin-Loaded Glass Fiber Reinforced Plastics Composites

Sang-Young Kim, Daniel J. Hennigan, Dave (Dae-Wook) Kim

J. Eng. Mater. Technol. October 2012, 134(4): 041012. doi: https://doi.org/10.1115/1.4007351

Abstract

View articletitled, Influence of Fabrication and Interference-Fit Techniques on Tensile and Fatigue Properties of Pin-Loaded Glass Fiber Reinforced Plastics Composites

Open the PDF for in another window

Topics: Bearings , Composite materials , Fatigue properties , Glass reinforced plastics , Manufacturing , Press fits , Fatigue , Stress , Failure , Fatigue testing

Surface Stress Effect on the Pull-In Instability of Hydrostatically and Electrostatically Actuated Rectangular Nanoplates With Various Edge Supports

R. Ansari, R. Gholami, M. Faghih Shojaei, V. Mohammadi, M. A. Darabi

J. Eng. Mater. Technol. October 2012, 134(4): 041013. doi: https://doi.org/10.1115/1.4007260

Abstract

View articletitled, Surface Stress Effect on the Pull-In Instability of Hydrostatically and Electrostatically Actuated Rectangular Nanoplates With Various Edge Supports

Open the PDF for in another window

Topics: Boundary-value problems , Stress , Hydrostatic pressure , Hydrostatics

Using Damage Delocalization to Model Localization Phenomena in Bammann-Chiesa-Johnson Metals

Koffi Enakoutsa, Fazle R. Ahad, Kiran N. Solanki, Yustianto Tjiptowidjojo, Douglas J. Bammann

J. Eng. Mater. Technol. October 2012, 134(4): 041014. doi: https://doi.org/10.1115/1.4007352

Abstract

View articletitled, Using Damage Delocalization to Model Localization Phenomena in Bammann-Chiesa-Johnson Metals

Open the PDF for in another window

Topics: Damage , Shear (Mechanics) , Metals , Energy dissipation , Temperature

The Draw-Bend Fracture Test and Its Application to Dual-Phase and Transformation Induced Plasticity Steels

Ji Hyun Sung, Ji Hoon Kim, R. H. Wagoner

J. Eng. Mater. Technol. October 2012, 134(4): 041015. doi: https://doi.org/10.1115/1.4007261

Abstract

View articletitled, The Draw-Bend Fracture Test and Its Application to Dual-Phase and Transformation Induced Plasticity Steels

Open the PDF for in another window

Topics: Fracture (Materials) , Fracture (Process) , Steel , Shear (Mechanics) , Failure

Technical Briefs

Properties of Composite Cylinders Fabricated by Bladder Assisted Composite Manufacturing

J. P. Anderson, M. C. Altan

J. Eng. Mater. Technol. October 2012, 134(4): 044501. doi: https://doi.org/10.1115/1.4007017

Abstract

View articletitled, Properties of Composite Cylinders Fabricated by Bladder Assisted Composite Manufacturing

Open the PDF for in another window

Topics: Composite materials , Cylinders , Laminates , Manufacturing , Pressure , Fibers , Molding

Characterization of Zinc Powder Compactions: Factors Affecting Mechanical Properties and Analytical Powder Metallurgy Models

Ben J. Rael, Casey L. Dyck, Tariq A. Khraishi, Mehran Tehrani, Marwan S. Al Haik

J. Eng. Mater. Technol. October 2012, 134(4): 044502. doi: https://doi.org/10.1115/1.4005404

Abstract

View articletitled, Characterization of Zinc Powder Compactions: Factors Affecting Mechanical Properties and Analytical Powder Metallurgy Models

Open the PDF for in another window

Topics: Compacting , Density , Manufacturing , Mechanical properties , Particulate matter , Porosity , Powder metallurgy , Pressure , Sintering , Microhardness

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy

J. Eng. Mater. Technol (April 2025)

Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam

J. Eng. Mater. Technol (April 2025)

Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study

J. Eng. Mater. Technol (July 2025)

Tensile, Flexural, and Fatigue Responses of Lightweight Pumice-Reinforced Magnesium Composite: Experimentation Followed by an Analytical Modeling

J. Eng. Mater. Technol (July 2025)

Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components

J. Eng. Mater. Technol (April 2025)

Research Papers

Modeling and Simulation of the Cooling Process of Borosilicate Glass

Deformation Behavior and Failure Analysis of Wrought Magnesium During Twin Rolling Casting and Hot Compression

Strengthening Behavior and Tension–Compression Strength–Asymmetry in Nanocrystalline Metal–Ceramic Composites

A Damage Model for Adhesively Bonded Single-Lap Thick Composite Joints

Nonlinear Stress–Strain Characterization of Cast Iron Used to Manufacture Pipes for Water Supply

Simulation of Material Flow and Heat Evolution in Friction Stir Processing Incorporating Melting

An Internal State Variable Constitutive Model for Deformation of Austenitic Stainless Steels

Comparison Between Two Experimental Procedures for Cyclic Plastic Characterization of High Strength Steel Sheets

Effect of KIII on Fatigue Crack Growth Behavior

Design of Radiation Tolerant Nanostructured Metallic Multilayers

Study of Ductile-to-Brittle Transition in Single Grit Diamond Scribing of Silicon: Application to Wire Sawing of Silicon Wafers

Influence of Fabrication and Interference-Fit Techniques on Tensile and Fatigue Properties of Pin-Loaded Glass Fiber Reinforced Plastics Composites

Surface Stress Effect on the Pull-In Instability of Hydrostatically and Electrostatically Actuated Rectangular Nanoplates With Various Edge Supports

Using Damage Delocalization to Model Localization Phenomena in Bammann-Chiesa-Johnson Metals

The Draw-Bend Fracture Test and Its Application to Dual-Phase and Transformation Induced Plasticity Steels

Technical Briefs

Properties of Composite Cylinders Fabricated by Bladder Assisted Composite Manufacturing

Characterization of Zinc Powder Compactions: Factors Affecting Mechanical Properties and Analytical Powder Metallurgy Models

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only