Every year more than 15.000 total hysterectomy procedures are performed in the Netherlands. From all these procedures, only a minor part is done via a laparoscopic approach. One reason for this is the high complexity of the procedure. The uterus is difficult to reach with the laparoscopic tools and nearby structures are easily damaged. Especially, the separation of the uterus at the fornix needs to be done with great care and is time consuming (i.e., typically takes more than 15–20 min). This results in long procedure times. To resolve part of these difficulties, a new instrument has been designed that enables separation of the uterus via a vaginal approach. The device uses a cutting mechanism to safely separate the uterus from the vagina wall. The design allows the application of an existing manipulator to mobilize the uterus for better access of laparoscopic tools. A prototype of the separation tool, MobiSep, has been manufactured. The new separation principle has been evaluated in a test setup. Over the device a tubular piece of tissue was mounted, resembling the vagina wall. The results show that the time needed for full separation is on average 102 (s). The maximum driving force needed to cut the tissue is found to be 50 (N), which can be applied manually. It is expected that this prototype is intuitive to use, can contribute to the reduction of the complexity of laparoscopic hysterectomy procedures and can reduce the total procedure time.
Skip Nav Destination
Article navigation
Design Of Medical Devices Conference Abstracts
Vaginal Approach for Uterus Separation During Laparoscopic Hysterectomy
Mart M. C. Gahler,
Mart M. C. Gahler
Delft University of Technology
Search for other works by this author on:
Nick N. J. van de Berg,
Nick N. J. van de Berg
Delft University of Technology
Search for other works by this author on:
Frank W. Jansen,
Frank W. Jansen
Leiden University Medical Center
Search for other works by this author on:
John van den Dobbelsteen
John van den Dobbelsteen
Delft University of Technology
Search for other works by this author on:
Mart M. C. Gahler
Delft University of Technology
Nick N. J. van de Berg
Delft University of Technology
Johann Rhemrev
Bronovo Hospital
Frank W. Jansen
Leiden University Medical Center
John van den Dobbelsteen
Delft University of Technology
J. Med. Devices. Jun 2010, 4(2): 027514 (1 pages)
Published Online: August 9, 2010
Article history
Online:
August 9, 2010
Published:
August 9, 2010
Citation
Gahler, M. M. C., van de Berg, N. N. J., Rhemrev, J., Jansen, F. W., and van den Dobbelsteen, J. (August 9, 2010). "Vaginal Approach for Uterus Separation During Laparoscopic Hysterectomy." ASME. J. Med. Devices. June 2010; 4(2): 027514. https://doi.org/10.1115/1.3442765
Download citation file:
Get Email Alerts
Cited By
A Better Way to Visualize the Cervix: A Low-Cost Cervical Cancer Screening Device for LMIC Settings
J. Med. Devices (April 2025)
Comparative Survey-Based Study of Noninvasive Saliva Collection Devices
J. Med. Devices (April 2025)
Related Articles
Design of a Compliant Steerable Arthroscopic Punch
J. Med. Devices (June,2010)
Design and Development of an Improved Tissue Retractor for Use in Minimally Invasive Surgical Procedures
J. Med. Devices (June,2011)
A Comparitive Overview of Existing and Experimental Morcellators in Gynecology and Urology
J. Med. Devices (June,2011)
Mechanical Design for Modularity of Laparoscopic Tools
J. Med. Devices (June,2008)
Related Proceedings Papers
Related Chapters
Spherical SOFM: Implications for Forensics and Craniofacial Surgery
Intelligent Engineering Systems through Artificial Neural Networks
mDFA Human Empirical Results
Modified Detrended Fluctuation Analysis (mDFA)
Introduction and scope
Impedimetric Biosensors for Medical Applications: Current Progress and Challenges