On several occasions, freak waves have been observed in the past, some causing severe damage. In order to model such extreme wave conditions, one possibility is to use focused waves of first- or second-order based on irregular sea-state wave spectra. The wave phase is chosen such that the waves focus at a predetermined location and time, but the individual wave components become steep and start breaking before the focus location for large amplitudes. In this study, transient wave packets are used for extreme wave generation. Extreme waves are generated that are higher and only break at the concentration point using the transient wave packets method implemented in the open-source CFD model REEF3D. Model validation is performed by comparison to experimental results. The generation of wave packets with an 8.3 times shorter focus distance is investigated and the wave is replicated in a shorter domain with a 9% higher crest. The method is further used to generate a steepness induced-breaking wave and calculation of extreme wave forces on an offshore structure is demonstrated.
Skip Nav Destination
Article navigation
August 2019
Research-Article
Extreme Wave Generation, Breaking, and Impact Simulations Using Wave Packets in REEF3D
Hans Bihs,
Hans Bihs
Department of Civil and
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: hans.bihs@ntnu.no
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: hans.bihs@ntnu.no
Search for other works by this author on:
Arun Kamath,
Arun Kamath
Department of Civil and
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: arun.kamath@ntnu.no
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: arun.kamath@ntnu.no
Search for other works by this author on:
Mayilvahanan Alagan Chella,
Mayilvahanan Alagan Chella
Department of Civil and
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: acm@ntnu.no
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: acm@ntnu.no
Search for other works by this author on:
Øivind A. Arntsen
Øivind A. Arntsen
Department of Civil and
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: oivind.arntsen@ntnu.no
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: oivind.arntsen@ntnu.no
Search for other works by this author on:
Hans Bihs
Department of Civil and
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: hans.bihs@ntnu.no
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: hans.bihs@ntnu.no
Arun Kamath
Department of Civil and
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: arun.kamath@ntnu.no
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: arun.kamath@ntnu.no
Mayilvahanan Alagan Chella
Department of Civil and
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: acm@ntnu.no
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: acm@ntnu.no
Øivind A. Arntsen
Department of Civil and
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: oivind.arntsen@ntnu.no
Environmental Engineering,
Norwegian University of
Science and Technology, NTNU,
Trondheim 7491, Norway
e-mail: oivind.arntsen@ntnu.no
1Corresponding author.
Contributed by the Ocean, Offshore, and Arctic Engineering Division of ASME for publication in the JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING. Manuscript received July 17, 2017; final manuscript received November 23, 2018; published online January 17, 2019. Assoc. Editor: Yi-Hsiang Yu.
J. Offshore Mech. Arct. Eng. Aug 2019, 141(4): 041802 (7 pages)
Published Online: January 17, 2019
Article history
Received:
July 17, 2017
Revised:
November 23, 2018
Citation
Bihs, H., Kamath, A., Alagan Chella, M., and Arntsen, Ø. A. (January 17, 2019). "Extreme Wave Generation, Breaking, and Impact Simulations Using Wave Packets in REEF3D." ASME. J. Offshore Mech. Arct. Eng. August 2019; 141(4): 041802. https://doi.org/10.1115/1.4042178
Download citation file:
Get Email Alerts
Hydroelastic analysis of interconnected offshore floating photovoltaic floats
J. Offshore Mech. Arct. Eng
Efficient Project Planning for Floating Offshore Wind Farm Development
J. Offshore Mech. Arct. Eng
The Scattering of Water Waves by M-Floating Porous Plates Over (M − 1) Trenches
J. Offshore Mech. Arct. Eng (December 2025)
Related Articles
Cross-Flow Vibrations of a Pipe Close to a Rigid Boundary
J. Energy Resour. Technol (December,1984)
Mesoscopic Collective Dynamics in Liquids and the Dual Model
J. Heat Transfer (November,2022)
On the Development of an Efficient Surrogate Model for Predicting Long-Term Extreme Loads on a Wave Energy Converter
J. Offshore Mech. Arct. Eng (December,2019)
Hydrodynamic Evaluation of Multi-Layer Wave Filters and Absorbers
J. Offshore Mech. Arct. Eng (February,1999)
Related Proceedings Papers
Related Chapters
Response of Silts to Wave Loads: Experimental Study
Strength Testing of Marine Sediments: Laboratory and In-Situ Measurements
Measurements on Natural Dispersion
Oil Dispersants: New Ecological Approaches
A Small-Scale Laboratory Dispersant Effectiveness Test
Chemical Dispersants for the Control of Oil Spills