The leakage rates of bolted flanged connections change with service time due to the gasket contact stress relaxation and degradation of gasket material. The nonuniform distribution of gasket contact stress has significant influence on the leakage behavior of the connections. In order to predict the time-correlated leakage rates accurately, both appropriate approaches to dealing with the gasket residual contact stress and a corresponding time-correlated leakage model of sealing elements are needed. In this paper, an analytical model has been developed to determine the maximum contact stress at gasket outer diameter in consideration of creeps of flanges, bolts and gasket coupled to the axial deformation compatibility equation. The analysis was verified against the finite element numerical simulation considering the nonlinear behavior of gasket and material creep. The analytical results of the maximum contact stress of gasket and its change over time compared well with those obtained by finite element method. A time-correlated leakage model of nonmetallic gasket sealing connections based on the porous medium theory was established, in which the effects of the gasket material degradation and contact stress relaxation on the sealing performance were taken into consideration. Furthermore, a leakage rate prediction method was proposed. Some long-term sealing performance tests were performed on two types of gaskets to obtain the coefficients in the leakage model. The leakage rate prediction method proposed in this paper was also validated against the experimental data presented by other researchers, and the errors between the predicted values and the experimental results were within 18%.
Skip Nav Destination
e-mail: zhenguosun_01@163.com
e-mail: bqgu@njut.edu.cn
Article navigation
February 2012
Research Papers
Prediction of Time-Correlated Leakage Rates of Bolted Flanged Connections by Considering the Maximum Gasket Contact Stress
Z. G. Sun,
Z. G. Sun
College of Mechanical and Power Engineering,
e-mail: zhenguosun_01@163.com
Nanjing University of Technology
, 5 Xin Mo Fan Road, Nanjing, Jiangsu 210009, China
Search for other works by this author on:
B. Q. Gu
B. Q. Gu
College of Mechanical and Power Engineering,
e-mail: bqgu@njut.edu.cn
Nanjing University of Technology
, 5 Xin Mo Fan Road, Nanjing, Jiangsu 210009, China
Search for other works by this author on:
Z. G. Sun
College of Mechanical and Power Engineering,
Nanjing University of Technology
, 5 Xin Mo Fan Road, Nanjing, Jiangsu 210009, China
e-mail: zhenguosun_01@163.com
B. Q. Gu
College of Mechanical and Power Engineering,
Nanjing University of Technology
, 5 Xin Mo Fan Road, Nanjing, Jiangsu 210009, China
e-mail: bqgu@njut.edu.cn
J. Pressure Vessel Technol. Feb 2012, 134(1): 011211 (7 pages)
Published Online: December 7, 2011
Article history
Received:
February 26, 2010
Revised:
March 2, 2011
Online:
December 7, 2011
Published:
December 7, 2011
Citation
Sun, Z. G., and Gu, B. Q. (December 7, 2011). "Prediction of Time-Correlated Leakage Rates of Bolted Flanged Connections by Considering the Maximum Gasket Contact Stress." ASME. J. Pressure Vessel Technol. February 2012; 134(1): 011211. https://doi.org/10.1115/1.4004818
Download citation file:
Get Email Alerts
Lateral and Transverse Stiffness Requirements for Supports of Pipeline Systems Conveying Fluids
J. Pressure Vessel Technol
Evaluation of the Structural Suitability of Lifting Trunnions in Large Pressure Vessels
J. Pressure Vessel Technol (June 2025)
Related Articles
The Effect of Cylinder and Hub Creep on the Load Relaxation in Bolted Flanged Joints
J. Pressure Vessel Technol (August,2008)
New Development in Studies on the Characteristics of Bolted Pipe Flange Connections in JPVRC
J. Pressure Vessel Technol (February,2006)
On the Effect of External Bending Loads in Bolted Flange Joints
J. Pressure Vessel Technol (April,2009)
Effect of Bolt Spacing on the Circumferential Distribution of the Gasket Contact Stress in Bolted Flange Joints
J. Pressure Vessel Technol (August,2011)
Related Proceedings Papers
Related Chapters
Standardization of Valves, Flanges, Fittings and Gaskets (ASME B16 Standard)
Continuing and Changing Priorities of the ASME Boiler & Pressure Vessel Codes and Standards
Process Components
Bioprocessing Piping and Equipment Design: A Companion Guide for the ASME BPE Standard
Plate Exchangers
Heat Exchanger Engineering Techniques