...Amit Kumar; Shailesh Mani Pandey; Abir Bhattacharyya; Dariusz Fydrych; Sachin Sirohi; Chandan Pandey The present work aimed to investigate the microstructure and mechanical properties of the dissimilar shielded metal arc welded (SMAW) joint of Alloy 617 and P92 steel for advanced ultrasupercritical...

..., and solidification cracking. dissimilar welding austenitic stainless steel Inconel 718 Stainless steel 304 L microstructure mechanical properties filler material creep behavior residual stress The welding technique has been used for many years for joining similar and dissimilar materials...

.... In this paper, two designs of lightweight umbilical cables were studied in full consideration of the geometric characteristics, and the mechanical properties were investigated under tension, bending, and torsion. The contact and friction between the components of the umbilical cables were also included...

... experiment and mechanical properties of material expansion. Two materials are studied: 316 L and 20G. Then it analyses the error and causes of the error in the traditional analytical algorithm. Besides, it establishes an accurate finite element (FE) model to study the quantitative influence of expansion...

.... Repair mechanisms have been developed in restoring the loading capacity of damaged pipelines, and composite repair systems have become popular over the past few years. The mechanical properties of the putty/grout are critical to their potential application as infill materials in structural repair...

... five PSP samples and two PE pipe samples used in the experiment at 25 ° C and one PSP sample at every other temperature. The parameters of the samples are shown in Table 1 . However, an investigation about the mechanical properties of the PSP has not been reported in literature...

...Andrew M. Freborg; B. Lynn Ferguson; Michael A. Aronov; Nikolai I. Kobasko; Joseph A. Powell An alternative method for the hardening of steel parts has been developed as a means of providing steel products with superior mechanical properties through development of high residual compressive stresses...

... joining processes pressure vessels mechanical properties hardening stress-strain relations The frequent process of removing old tubes (de-tubing) and re-tubing during the life of the heat exchanger results in the enlargement of the tubesheet holes. When new tubes are installed...

... pressure vessels stress analysis stress effects mechanical properties thickness control Bolted joint analysis usually assumes axial external loading. Many practical bolted joints, such as pressure vessel flanges, are subjected to eccentric or bending loads, in addition to tension. The objective...

... October 2000 21 July 2000 20 April 2001 cracks fracture toughness fatigue cracks steel heat pipes mechanical properties strain control ductile-brittle transition pressure vessels One of the major concerns in maintaining pipeline integrity is third-party mechanical damage...

... for irradiation effects on the mechanical properties of 316FR (FBR Grade 316 stainless steel), which is a newly developed stainless steel for the Japanese demonstration fast breeder reactor, is proposed. The procedure gives a limit of accumulated fast neutron fluence E > 0.1 MeV as a function of temperature...

... and chemistry optimized to enhance elevated-temperature performance. Early in 1994, under sponsorship of The Japan Atomic Power Company, work was initiated at Oak Ridge National Laboratory (ORNL) aimed at obtaining an elevated-temperature mechanical-properties database on a single heat of this material...

.... Associate Technical Editor: C. Jaske. 26 July 1999 06 July 2000 stress analysis design engineering mechanical engineering computing mechanical properties pressure vessels load distribution Effective techniques for structural design and assessment rely on a trade-off between...

...Robert L. Sindelar; Poh-Sang Lam; George R. Caskey,, Jr.; Leta Y. Woo Mechanical properties of 1950’s vintage, A285 Grade B carbon steels have been compiled for elastic-plastic fracture mechanics analysis of storage tanks (Lam and Sindelar, 2000). The properties are from standard Charpy V-notch...