Skip Nav Destination
Issues
September 2019
ISSN 0090-3973
EISSN 1945-7553
In this Issue
Technical Papers
A Novel Test Specimen Geometry for Uniaxial Fatigue Testing of Asphalt Concrete
J. Test. Eval.. September 2019, 47(5): 3239–3258.
doi: https://doi.org/10.1520/JTE20180564
Effect of Reclaimed Asphalt Pavement and Recycled Asphalt Shingles on Fracture Tolerance of Asphalt Binders
J. Test. Eval.. September 2019, 47(5): 3259–3274.
doi: https://doi.org/10.1520/JTE20180669
Fracture Properties of Multirecycled Asphalt Mixes from Four-Point Bending Test Using Digital Image Correlation and Back Calculation
J. Test. Eval.. September 2019, 47(5): 3275–3288.
doi: https://doi.org/10.1520/JTE20180524
Fracture Resistance of HMA Mixtures Modified with Nanoclay and Nano-Al2O3
J. Test. Eval.. September 2019, 47(5): 3289–3308.
doi: https://doi.org/10.1520/JTE20180919
Increasing Precision and Confidence Level in Fracture Energy Measurement by Optimizing the Number of Test Replicates for Disk-Shaped Compact Tension Fracture Test (ASTM D7313)
J. Test. Eval.. September 2019, 47(5): 3309–3321.
doi: https://doi.org/10.1520/JTE20180624
Investigation of Crack Initiation Behavior of Asphalt Mixtures: Fatigue through Dynamic Semicircular Bending Test
J. Test. Eval.. September 2019, 47(5): 3322–3335.
doi: https://doi.org/10.1520/JTE20180668
Investigation of Cracking Performance of Asphalt-Rubber Gap-Graded Mixtures: Statistical Overview on Materials’ Interface
J. Test. Eval.. September 2019, 47(5): 3336–3354.
doi: https://doi.org/10.1520/JTE20180744
Mixed Mode I/II Fracture Strength of Modified HMA Concretes Subjected to Different Temperature Conditions
J. Test. Eval.. September 2019, 47(5): 3355–3371.
doi: https://doi.org/10.1520/JTE20180848
A Compensation Method for Spiral Error of Pipeline Bending Strain In-Line Inspection
J. Test. Eval.. September 2019, 47(5): 3372–3386.
doi: https://doi.org/10.1520/JTE20180110
A Longitudinal Study of Identifying Critical Variables Influencing Patient Safety Culture from Nurses’ Viewpoints in Taiwan
J. Test. Eval.. September 2019, 47(5): 3387–3398.
doi: https://doi.org/10.1520/JTE20180060
A Study of Precipitation-Strengthened Creep-Resistant Austenitic Stainless Steel for Supercritical and Ultra-Supercritical Power Plants
J. Test. Eval.. September 2019, 47(5): 3399–3416.
doi: https://doi.org/10.1520/JTE20170418
Development and Validation of a Miniature Tensile Specimen for Determination of Mechanical Properties
J. Test. Eval.. September 2019, 47(5): 3417–3431.
doi: https://doi.org/10.1520/JTE20180294
Eco-Friendly Snow Melting Systems Developed for Modern Expressways
J. Test. Eval.. September 2019, 47(5): 3432–3447.
doi: https://doi.org/10.1520/JTE20180161
Effects of Elevated Temperatures on Residual Properties of Low-Strength Concrete
J. Test. Eval.. September 2019, 47(5): 3448–3469.
doi: https://doi.org/10.1520/JTE20170739
Evaluation of Stabilized Graphite Nanoplatelets: Dispersion Quality and Mechanical Properties of Cement Composites
J. Test. Eval.. September 2019, 47(5): 3470–3479.
doi: https://doi.org/10.1520/JTE20180482
Evaluation of Thermal Properties of Cement-Exfoliated Vermiculite Blocks as Energy Efficient Building Envelope Material
J. Test. Eval.. September 2019, 47(5): 3480–3495.
doi: https://doi.org/10.1520/JTE20170520
Experimental and Analytical Study on Fatigue Crack Propagation of Pervious Concrete
J. Test. Eval.. September 2019, 47(5): 3496–3514.
doi: https://doi.org/10.1520/JTE20170710
Experimental Study on Manufactured Sand Shape Detection by Image Method
J. Test. Eval.. September 2019, 47(5): 3515–3532.
doi: https://doi.org/10.1520/JTE20170533
Finite Element Model Updating and Dynamic Analysis of a Restored Historical Timber Mosque Based on Ambient Vibration Tests
J. Test. Eval.. September 2019, 47(5): 3533–3562.
doi: https://doi.org/10.1520/JTE20180122
Improvement of Methadone Maintenance Treatment (MMT) Process Through Development and Implementation of Methadone Dispenser
Nor Amirah Mohd Amran, Mohd Sayuti Ab Karim, Rusdi Abd Rashid, Tuan Zaharinie Tuan Zahari, Amirul Latif Ishak
J. Test. Eval.. September 2019, 47(5): 3563–3575.
doi: https://doi.org/10.1520/JTE20180094
Influence of Basalt, Hydrated Lime, and Fly-Ash Fillers on Aging Behavior of Asphalt Mastic Using Essential and Plastic Work of Fracture
J. Test. Eval.. September 2019, 47(5): 3576–3593.
doi: https://doi.org/10.1520/JTE20180147
Introduction of New Tensile Specimen Geometry for Property Evaluation in Stamped Parts
Grant G. Justice, Alla V. Sergueeva, Andrew E. Frerichs, Brian E. Meacham, Sheng Cheng, Daniel J. Branagan
J. Test. Eval.. September 2019, 47(5): 3594–3604.
doi: https://doi.org/10.1520/JTE20170685
Investigation of Aging Behavior of Biorejuvenated Asphalt with Chemical and Micromechanical Methods
J. Test. Eval.. September 2019, 47(5): 3605–3621.
doi: https://doi.org/10.1520/JTE20170794
Location and Length Measurement of Invisible Fatigue Crack in Metal Components Using Wave Mixing Methods
Hanling Mao, Yuhua Zhang, Xinxin Li, Zhenfeng Huang, Hanying Mao, Xiaoqian Qin, Yingxiang Huang, Wanying Zhu, Bang Wang
J. Test. Eval.. September 2019, 47(5): 3622–3633.
doi: https://doi.org/10.1520/JTE20170639
Low Temperature Study on the Behavior of Reinforced Bitumen in Asphalt via Addition of Synthesized Basalt
J. Test. Eval.. September 2019, 47(5): 3634–3645.
doi: https://doi.org/10.1520/JTE20180413
Mechanism of Pile-Soil Relative Vertical Displacement under the Freeze-Thaw Action
J. Test. Eval.. September 2019, 47(5): 3646–3655.
doi: https://doi.org/10.1520/JTE20170294
Nanoscaled Characteristics of Recovered Asphalt Binders from Weathered Asphalt Mixtures
J. Test. Eval.. September 2019, 47(5): 3656–3670.
doi: https://doi.org/10.1520/JTE20180340
Novel Facile Technique for the Determination of Binding Strength of Adhesives
Emmanuel C. Ezeh, Charles C. Chime, Bernardine N. Nweze, Jude C. Okenwa, Sabestine A. Chukwuma, Chiedozie C. Nnaona
J. Test. Eval.. September 2019, 47(5): 3671–3675.
doi: https://doi.org/10.1520/JTE20170502
Shear Yield Stress of Magnetorheological Fluids between Characteristic Surfaces of Different Materials
J. Test. Eval.. September 2019, 47(5): 3676–3689.
doi: https://doi.org/10.1520/JTE20180544
Studies on Intergranular Corrosion Characteristics of Cast Duplex Stainless Steel Stabilized with Niobium
J. Test. Eval.. September 2019, 47(5): 3690–3704.
doi: https://doi.org/10.1520/JTE20170299
Study of the Extraction and Quantitative Characterization of the Microstructural Features of Aggregates
J. Test. Eval.. September 2019, 47(5): 3705–3718.
doi: https://doi.org/10.1520/JTE20170736
Testing and Validation of a Novel Segmented Wind Turbine Blade
J. Test. Eval.. September 2019, 47(5): 3719–3739.
doi: https://doi.org/10.1520/JTE20170238
The Influence of Footwear Tread Groove Orientation on Slip Outcome and Slip Severity
J. Test. Eval.. September 2019, 47(5): 3740–3750.
doi: https://doi.org/10.1520/JTE20170466
Weighted Modified Weibull Distribution
J. Test. Eval.. September 2019, 47(5): 3751–3764.
doi: https://doi.org/10.1520/JTE20170370
Review Articles
Analysis of MFL Model for Sucker Rod Defects and Its MFL Signal Processing
J. Test. Eval.. September 2019, 47(5): 3765–3780.
doi: https://doi.org/10.1520/JTE20170687
Optimal Plans and Estimation of Constant-Stress Accelerated Life Tests for the Extension of the Exponential Distribution under Type-I Censoring
J. Test. Eval.. September 2019, 47(5): 3781–3821.
doi: https://doi.org/10.1520/JTE20170553
Technical Notes
A New Autonomous Program Customized for Computing Surface Cracks in an Unsaturated Soil in a 1-D Column
A. Anangsha, Vinay Kumar Gadi, Sanandam Bordoloi, Sai Krishna Kothapalli, S. Sreedeep, Mei Guoxiong, Ankit Garg
J. Test. Eval.. September 2019, 47(5): 3822–3835.
doi: https://doi.org/10.1520/JTE20180609
Study on the Bending Performance of Composite H-Shaped Piles
J. Test. Eval.. September 2019, 47(5): 3836–3849.
doi: https://doi.org/10.1520/JTE20170547
Email alerts
RSS Feeds
Comparative Evaluation of Outlier Detection Methods for the Asphalt Fracture Tests
J. Test. Eval. (March 2025)
Fatigue Resistance of Unaged and Aged Bio-bitumen: Time Sweep Test versus Linear Amplitude Sweep Test
J. Test. Eval. (March 2025)
Estimation of the Stress-Strength Parameter for a Decreasing Failure Rate Model Based on Ranked Set Samples
J. Test. Eval. (November 2024)